Saturday, 19 January 2013
Sunday, 13 January 2013
Good weekend in the Batcave
Yesterday I finished shaping up the topside of the Batmobile.
Batman and Boy Wonder then put on a layer of Bat Carbon, and sucked it down the the Bat pump.
I am looking forward to unwrapping this tomorrow evening.
Batman and Boy Wonder then put on a layer of Bat Carbon, and sucked it down the the Bat pump.
I am looking forward to unwrapping this tomorrow evening.
Sunday, 6 January 2013
Batmobile and time machine.
It has been a longtime since I blogged in Doug Culnane's ego dot com but I have been busy blogging at my Crowize Blog. I have also been busy in the Batcave but mostly renovating the Batcave. However this weekend the Batmobile took a great leap closer to being finished. The mold was very slowly taking shape. The foam pannels are 2cm think house insulation foam that has great properties: cheap, light, stiff and easy to work with. The mold turned into a bit of a flat panel design.
It occurred to me that it is silly to make a mold and then a foam sandwich shell from it, why do I not carbon over the mold cut it in half down the middle and smash the bullheads out of it and carbon the inside skin. The only issue is the planned foam is 5mm think so the inside skin is 20 mm each side smaller and the outside skin is 5mm smaller. It is designed to be a tight fit over the trike so I may need to be a bit creative to get the trike to fit in it but small is good for aerodynamics and it will be so much less work and materials to use the mold as the shell. The extra weight of 15mm thicker foam is not worth worrying about for this experiment.
So this means I have just saved at least 6 months of weekends this weekend, which I am very happy about, because it gives me more time to continue the unending task of Batcave renovation...
It occurred to me that it is silly to make a mold and then a foam sandwich shell from it, why do I not carbon over the mold cut it in half down the middle and smash the bullheads out of it and carbon the inside skin. The only issue is the planned foam is 5mm think so the inside skin is 20 mm each side smaller and the outside skin is 5mm smaller. It is designed to be a tight fit over the trike so I may need to be a bit creative to get the trike to fit in it but small is good for aerodynamics and it will be so much less work and materials to use the mold as the shell. The extra weight of 15mm thicker foam is not worth worrying about for this experiment.
So this means I have just saved at least 6 months of weekends this weekend, which I am very happy about, because it gives me more time to continue the unending task of Batcave renovation...
Subscribe to:
Posts (Atom)
