tag:blogger.com,1999:blog-28609874734360103292024-02-21T00:49:36.453+01:00Doug Culnane's BlogDoug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.comBlogger215125tag:blogger.com,1999:blog-2860987473436010329.post-44230965115040005292020-10-14T22:54:00.000+01:002020-10-14T22:54:05.399+01:00Phoniebox - Homemade kids jukebox.<h2 style="text-align: left;"> Phoniebox - Homemade kids jukebox.</h2><p class="title style-scope ytd-video-primary-info-renderer" style="text-align: left;">Some projects are just too much fun to not do. <a href="http://phoniebox.de/" target="_blank">Phoniebox</a> is a Raspberry PI based kids jukebox that uses RFID tags
to play audio files in a folder. This simple idea allows for a lot of
creativity building and filling the box with content.<br /><br /></p><div class="separator" style="clear: both; text-align: center;"><iframe allowfullscreen="" class="BLOG_video_class" height="344" src="https://www.youtube.com/embed/XqpEFlQigAs" width="408" youtube-src-id="XqpEFlQigAs"></iframe></div><p></p><br />Inside there is a Raspberry PI 3, USB RFID Reader, USB Powered Speakers, USB sound card and USB power-bank. So wring is mostly plugging in. The optional arcade buttons are wired to the GPIO pins for push button control.<br /><h1 class="title style-scope ytd-video-primary-info-renderer"><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgPKZ7BOXl8ygmIbfV7IYCmzbdLJuFtw9GIpJkK8yRFCtQ_kkOhuT7WFgsBFUZcB_wxOBwAG7C6Fn0PmbpGDNP12wRFjRrpnXx9i-baSbanDaOBdPwp_A5MIkXoD0D1mje_3xk64Cb-xr9M/s2048/Inside.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1211" data-original-width="2048" height="236" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgPKZ7BOXl8ygmIbfV7IYCmzbdLJuFtw9GIpJkK8yRFCtQ_kkOhuT7WFgsBFUZcB_wxOBwAG7C6Fn0PmbpGDNP12wRFjRrpnXx9i-baSbanDaOBdPwp_A5MIkXoD0D1mje_3xk64Cb-xr9M/w400-h236/Inside.jpg" width="400" /></a></div></h1><p style="text-align: left;"> The case is a mix of repurposed materials and 3D printed parts. The software is mostly scripts on top of Mopidy / MPD / ALSA so it is very customizable and flexible.</p><p style="text-align: left;"><br /></p>Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-49691472731192923442020-05-13T16:06:00.000+01:002020-05-13T16:06:08.297+01:00Solar Power Home Automation BusOriginally published here: <a href="https://openforce.com/blog/2020/05/13/solar-openhab/">https://openforce.com/blog/2020/05/13/solar-openhab/</a> this is an example of DIY Solar Automation with openHAB<br />
<h2 id="The-stars-align">
The stars align</h2>
There are various hot topics at the moment that are undergoing massive transformation and development.<br />
<ul>
<li>Electric cars </li>
<li>Renewable energy </li>
<li>Home batteries </li>
<li>Smart homes</li>
<li>Cloud data</li>
<li>Smart electric grids </li>
<li>The environmental crisis</li>
</ul>
Combining these evolving themes has the potential to provide environmental and financial benefits that will transform our lives.<br />
We have the challenges of fluctuating renewable energy production as
well as consumption. Energy storage needs to be managed intelligently to
make it cost effective. Smart decisions may require information like
the weather forecast and the current market price of electricity. How
can we master these new complex systems?<br />
No doubt forward looking companies will be working on products to
take advantage of the new opportunities created by this disruption.
This article looks at a DIY approach to managing and automating home
systems. <br />
<h2 id="openHAB-the-open-Home-Automation-Bus">
openHAB the open Home Automation Bus</h2>
openHAB
is an open source project that aims to reduce all things to a number or
state so that they can be modeled, monitored and controlled across
products, protocols and contexts. It has bindings to many “things” and
it can run on a Raspberry PI. <br />
Using the openHAB bindings various devices can be combined to build
smart systems. Here we use the openHAB Fronious binding to get data
from the inverter and MQTT messages to communicate with remote devices.
Grafana can be used to monitor the systems with dynamic charts. <br />
If you want to play along at home, here is a dockerized openHAB
example with a mysql database and grafana charts. It models a house
with Solar Panels. You will need a Fronious inverter with smart meter
running on your network.<br /><br />
<pre><code>git clone <a href="https://github.com/dougculnane/openHAB_solar.git">https://github.com/dougculnane/openHAB_solar.git</a></code></pre>
<h2 id="Smart-Solar-Power">
Smart Solar Power</h2>
To
get the best return on investment from a domestic solar power system
you have to shift your electric consumption to use the energy your
system produces. <br />
Changing personal behaviour to run dishwashers and washing machines
when the sun shines helps a great deal but we can also automate systems.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjPOMvWkdWDhJM_hxZw5YpAxXE_FzgrSBtpn6MtqiBtWuxcpIRpy1py932orIgTn7Z0ILjTx3v-rVsXMIkw3-LO7PvlDnQ29ry4MKwqW4QH1i_RjWUdhhbM054R6yQCf8ca4VVyDjrYLKcc/s1600/GoodAndBadDays.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="631" data-original-width="1600" height="156" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjPOMvWkdWDhJM_hxZw5YpAxXE_FzgrSBtpn6MtqiBtWuxcpIRpy1py932orIgTn7Z0ILjTx3v-rVsXMIkw3-LO7PvlDnQ29ry4MKwqW4QH1i_RjWUdhhbM054R6yQCf8ca4VVyDjrYLKcc/s400/GoodAndBadDays.png" width="400" /></a></div>
<h3 id="Use-PV-power-to-heat-water">
Use PV power to heat water.</h3>
Heating
a hot water tank requires a few kilowatts hours of energy. They are a
kind of large energy store that is very simple and cheap. Hot water can
also be a useful luxury in a modern home. Obviously we want to heat
the water with the energy we produce rather than the expensive
electricity we buy from the grid.<br />
By controlling the thermostat using openHAB and developing rules that
automatically adjust the thermostat temperature based on the current
electric grid meter value, we can soak up some energy rather than
exporting it to the grid.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjscltm5d0f3-tFgeyXiOJ_V2KXAz2ibV4TVdWb8RBw6y3WrAmwRMTRzU-DR4CDA98lJv9pwnV_LVkDOFIPo1X7g7tdpehizBKq1zERBuZRrKLG7bCCJZrw2cKsUYUsI-yOZi0lUcY6LNrj/s1600/SunnyDay.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="639" data-original-width="1600" height="158" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjscltm5d0f3-tFgeyXiOJ_V2KXAz2ibV4TVdWb8RBw6y3WrAmwRMTRzU-DR4CDA98lJv9pwnV_LVkDOFIPo1X7g7tdpehizBKq1zERBuZRrKLG7bCCJZrw2cKsUYUsI-yOZi0lUcY6LNrj/s400/SunnyDay.png" width="400" /></a></div>
<br />
<br />
<br />
Here you can see a good sunny day where the hot water tank stored
about 3kWh between 12:00 and 13:00. We can also see that manually
putting on the dishwasher, washing machine and cooking during the day
helps to match production with consumption. The trigger for the hot
water tank needs to be on the grid power measurement so it does not turn
on while the oven is on etc.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjoaJuXMt7q6G2qyRmXEVwohae9oF9NcUpdd8LdrpPrKiEtWbRYlmHKppRqkH5wVJLqfRE4Fz8_cUeFPGLjlkPaLjDXyR7T2Z4u-fqqyHW9TSoBWvcPJQtOdqU4EvQLFt2TjGcqAQLFfkH2/s1600/VariablePower.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="592" data-original-width="1600" height="147" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjoaJuXMt7q6G2qyRmXEVwohae9oF9NcUpdd8LdrpPrKiEtWbRYlmHKppRqkH5wVJLqfRE4Fz8_cUeFPGLjlkPaLjDXyR7T2Z4u-fqqyHW9TSoBWvcPJQtOdqU4EvQLFt2TjGcqAQLFfkH2/s400/VariablePower.png" width="400" /></a></div>
Some days the production and consumption curves are not as
predictable and so averaging out the measurements over a few minutes is
needed in the rules to add a bit of stability to control decisions.<br />
<h3 id="Electric-car-charging">
Electric car charging</h3>
Electric
cars bring a huge battery to these connected systems. Most of these
mobile batteries are idle more than 90% of the time, and so slow
charging could be used to soak up excess PV power. With vehicle to grid
technologies the night time consumption can be shifted to the day.<br />
A mobile battery project is in my task back catalogue so hopefully I will be able to report on that soon.<br />
<h2 id="The-future">
The future</h2>
Hopefully
this article has shown the potential for this smart approach. Rules
can be developed to balance the electrical grid, make money and/or
increase comfort. We all have different priorities that also evolve and
change as new systems develop. Maybe this DIY approach is not for
everyone but becoming master of your domain can be a lot of technical
fun. <br />
<br /><br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-34189688684979668252020-02-04T20:55:00.000+01:002020-02-04T20:55:05.528+01:00The Home Automatization Platform openHAB<h2>
</h2>
The main reasons for automating your home will be efficiency, convenience and security. It also allows you to implement intelligent designs that automate systems that would otherwise not be at all practical.<br />
<br />
It is important to understand measure and monitor the systems you design and to own them. It is also important to turn everything into a number, state or command no matter what system or equipment you are modelling. <br />
<br />
The approach <a href="https://www.openhab.org/">openHAB</a> uses is perfect for creating cheap and fairly easy automated systems that are a mix of different DIY devices and products.<br />
<br />
If you want to get started, get a Raspberry PI (old computer or docker runtime..) and set up openHAB. You can use the PaperUI to install bindings and see if you can get them working with any smart devices you have in your home. I like to use the HABPanel to make simple UIs for monitoring and controlling devices. There is plenty documentation and if you have the determination and patience you can access your openHAB over the internet securely.<br />
<br />
If you can do that you can build systems that, for example:<br />
<ul>
<li>monitor temperature and humidity</li>
<li>turn on / off ventilation fans</li>
<li>detect when you are home</li>
<li>set your thermostat setting</li>
<li>get the current weather forecast</li>
<li>turn on heaters</li>
<li>open ventilation flaps</li>
<li>charge batteries</li>
<li>control lighting levels and hue</li>
<li>monitor energy consumption</li>
<li>mow your lawn</li>
<li>monitor solar power production</li>
<li>charge electric cars</li>
<li>collect and display calendar data </li>
<li>pull in data from the cloud</li>
<li>turn on music</li>
<li>...</li>
</ul>
The real power of this type of home automatization comes when you make rules across these different system. ie.: "When the grid electric price is low and the home battery is below 20% turn on the irrigation system until I get home then play Led Zeppelin in the Living Room." <br />
<br />
OK that might not be a useful rule but I hope you get the potential of these ideas. I hope to demonstrate some more piractical examples of projects that I have done.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-18624286732435701392020-02-04T19:50:00.000+01:002020-02-04T19:50:51.712+01:00I believe I wrote the below a few years ago (before the Paris Agreement, BREXIT and TRUMP). Since then I have played, experimented, failed and had a little success. I hope to share what is worth sharing so i opened up my blog and found the below which is is good optimistic introduction so I am posting it.<br />
<b><br />I believe we have a problem.</b><br />
<br />
I believe that humanity faces huge challenges if we are to sustain our species in large numbers (or even complex life on this planet) for the next few decades. A few decades is a long time for a mortal but having had the luxury of living in a few decades of growth I worry about a future of dramatic decline.<br />
<br />
Politically these challenges seam impossible to address at anything like the required pace of change required. The current political tactic of confusing opinion and beliefs with science, fact and basic maths, does nothing other than paralyse the progress needed to address the existential threats we face.<br />
<br />
The main problem we face is well explained <a href="http://physics.ucsd.edu/do-the-math/2011/07/galactic-scale-energy/">here</a>. I believe that to instigate rapid positive political change we need to be aspirational or (as history often documents) war and/or disaster will result in positive political change eventually (if it is not too late). <br />
<br />
<b>I believe there are solutions.</b><br />
<br />
What ever happens I believe increasingly rapid change is unavoidable and
we can individually choose in which direction we wish to contribute to
that change. Individually we can make a small but significant difference and
collectively we will determine the fate of the species inhabiting this
planet.<br />
<br />
I do believe that there are technical solutions out there that are aspirational and elegant and empowering. These solutions might conflict with some commercial and systemic interests but they can be personally enriching. Nature gives us a well established blueprint for experimentation by embracing biodiversity, efficiency, cooperation and cyclic systems together with brutal honestly. Humans can use science, intelligent guess work and modern communication to accelerate system change without the slow messy process of evolution.<br />
<br />
The political systems will quickly follow the popular opinion and the Paris Agreement gives us hope that a real framework for avoiding irreversible climate collapse will develop.<br />
<br />
<br />
<b>Belief is for bullshitters we need maths and science.</b><br />
<br />
Above are my evolving
beliefs and opinions. I might be
wrong but I intend to play with some ideas to learn more and I thought I
would share my projects here for anyone that is interested.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
The motivation of these projects is based on the following criteria:<br />
<ol>
<li><b>Energy.</b><br />Energy needs to
be distributed equally per person if it is to be an equitable (and
therefore a stable) system. Total energy use must fit with the solar budget of the planet so anything that reduces total energy is probably good.<b><br /></b></li>
<li><b>C02</b><br />Reducing total C02 emissions is essential.</li>
<li><b>Cyclic Systems</b><br />Building cyclic systems dramatically exposes environmental damage outsourcing and so should be a priority.</li>
<li><b>Economic</b><br />Costs are subjective but good value for money is important to me personally.</li>
<li><b>Robust.</b><br />Solutions need to be robust and empowering rather than create external dependencies. <b><br /></b></li>
<li><b>Fun and easy</b><br />I like to have fun and I am lazy. </li>
</ol>
I think tracking personal energy use and environmental complexity
honestly is brutal and full of hypocrisy, and therefore it is often
corrupted. I think it is a fascinating technical challenge that I wish
to investigate without corruption as best I can. <br />
<br />
<ol>
</ol>
Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-9163259567481158822015-04-24T16:37:00.000+01:002015-04-24T16:37:39.208+01:00Bat toys....<div style="text-align: left;">
Winter is over and the Bat toy are finished. </div>
<div style="text-align: left;">
<br /></div>
<div style="text-align: left;">
The Moth's Junk Yard Challenge foils are fast but difficult to sail. So I am back on the learning curve with speed available if I get the settings right and do not crash. In one week we have the AUT Euro Cup so after a fantastic training session last weekend I have a great weekend of racing to look forward to. This project gets 9 out of 10 for value for money and 10 out of 10 for turning my gibes into a wobbly mess.</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEinrDiRZknwtwTYICFb3mDles27ftn6bppp2nuKnG_GHtkzF07Qx9fadhASJZvYvkNb2moe3EkqV8SB_LzkfyXJZc-yXnkjMkf8JLZ_jcy7QWTCVPE7J2in_uJU83ZiR7bkIy3eqNEFNwyf/s1600/Moth.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><br /><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEinrDiRZknwtwTYICFb3mDles27ftn6bppp2nuKnG_GHtkzF07Qx9fadhASJZvYvkNb2moe3EkqV8SB_LzkfyXJZc-yXnkjMkf8JLZ_jcy7QWTCVPE7J2in_uJU83ZiR7bkIy3eqNEFNwyf/s1600/Moth.jpg" height="400" width="400" /></a></div>
<br />
The Batmobile is also done and it has had a road test. Getting it in and
out of the cave without scratching is nearly impossible. The metal
trike frame is much more flexible than the carbon shell which means the back
wheel needs a bit more support and there are other details to play with. It is really fun and fast although it
does attract a bit too much attention. It gets 2 out of 10 for
practicality and 9 out of 10 for long distance cruising speed. It needs a lot of work on practical details but it is fun and does make
people smile. <br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj2WHQ2mhmY1sv_f3ihVh1cyZoUrnMigOu2WFJ_8KZRGWZ_qyPI5dKxbSde8kJ16dHCaJW9uS62oECtuXzNm5PTnzFIaobuZFMbAq-5IFyY4BlwjTF-pOGQ6wMGy_RlrHM9h858Axuqi0VR/s1600/IMAG0235.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj2WHQ2mhmY1sv_f3ihVh1cyZoUrnMigOu2WFJ_8KZRGWZ_qyPI5dKxbSde8kJ16dHCaJW9uS62oECtuXzNm5PTnzFIaobuZFMbAq-5IFyY4BlwjTF-pOGQ6wMGy_RlrHM9h858Axuqi0VR/s1600/IMAG0235.jpg" height="226" width="400" /></a></div>
<br />Here is the last Bat Cave update of the build.<br /><br />
<iframe width="560" height="315" src="https://www.youtube.com/embed/k8-a6noIJu8" frameborder="0" allowfullscreen></iframe>
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-59795541548619141422015-03-16T18:31:00.000+01:002015-03-16T18:31:21.905+01:00Batcave Updates.<iframe width="560" height="315" src="https://www.youtube.com/embed/S51DKsLt8Z0" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/RiBMjAPdY3o" frameborder="0" allowfullscreen></iframe>
Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-88269147082170098932015-01-06T20:08:00.000+01:002015-01-06T20:08:12.866+01:00Batcave project updatesIt is that time of year when there are plenty of holidays and the whether is bad. <br /><br />My 5 year old Moth foils are maybe not the fastest out there so I and recycling some old bits to get a new rudder. The old Bladerider horizontal on an Aardvark vertical will be replaced by an Aardvark horizontal on an Assassin main foil vertical. The horizintal was destroyed so is glued it together with an slight anhedral for fun. The new foil is much thinner and smaller and it fits in my rudder stock so I can use either one (once the gantry angle is adjusted). The rudder looks fast and it did not cost 2000 euros.<br />
<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgKK8xcaG5JVZb8W2qGOFABYolb1_t6cZcfVQaw1eaVJN2fPRdBklyi2tw7434hi3LnlKuADF2Wuo6oQBXiE7iNvfVafEjpqXcq24_0BFFp9ClEraDr0FnZ4RSiVw6XYwEFvAbXrf1CMt0F/s1600/IMAG0163.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgKK8xcaG5JVZb8W2qGOFABYolb1_t6cZcfVQaw1eaVJN2fPRdBklyi2tw7434hi3LnlKuADF2Wuo6oQBXiE7iNvfVafEjpqXcq24_0BFFp9ClEraDr0FnZ4RSiVw6XYwEFvAbXrf1CMt0F/s1600/IMAG0163.jpg" height="226" width="400" /></a></div>
<br />
I do need a main foil so if anyone has old broken modern main foils let me know.<br />
<br />The batmobile is now glued together and projressing well. Here as some progress videos to self motivate and keep the story going:<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/LLC1VfKyHYw" width="560"></iframe>
<br />
<iframe width="560" height="315" src="//www.youtube.com/embed/-81ugM-yaR8" frameborder="0" allowfullscreen></iframe>
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-1549656101567849502014-11-29T19:02:00.001+01:002014-11-29T19:03:00.028+01:00Slow progress, but progress!!!This winter I really want to get the Batmobile finished. Here is a self motivation progress update.<br />
<br />
<iframe width="560" height="315" src="//www.youtube.com/embed/XgZHpMOSqWc" frameborder="0" allowfullscreen></iframe>Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com2tag:blogger.com,1999:blog-2860987473436010329.post-383810407354809262014-08-06T17:04:00.000+01:002014-08-06T17:04:10.750+01:00Diamond Foil Project<h2>
Design and Build of a Surface Piercing Hydrofoil System</h2>
<a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"></a>$Revision: 1.21 $ <br />
$Date: 2005/08/28 13:40:22 $<br />
<h3>
<a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a>
Introduction</h3>
Hydrofoils are very very cool. This project will convert a conventional
(1994) Moth into a hydro-foil boat with the minimum effort. The project is
documented here to encourage others to try and share these or similar ideas.
Contributions to this work in progress are very welcome.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh34yXiJabzOsoDf1pM3xMEOoeHCMXQeMRd1OmMZxAf3u60MW_nPCk6HSFBeMJuxM_6TkaDbpje8xYuqKB_udyqrMG52prUY-xxqcrRPZY8E08dH5XDJk1IMcU43r9LkZYT5lIPuG5EWRZb/s1600/DiamondFlying.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh34yXiJabzOsoDf1pM3xMEOoeHCMXQeMRd1OmMZxAf3u60MW_nPCk6HSFBeMJuxM_6TkaDbpje8xYuqKB_udyqrMG52prUY-xxqcrRPZY8E08dH5XDJk1IMcU43r9LkZYT5lIPuG5EWRZb/s1600/DiamondFlying.jpg" height="270" width="400" /></a></div>
<br />
<div align="center">
</div>
<h3>
Design Brief</h3>
<blockquote>
- Cheap (Home build)<br />
- Easy (not too much time investment)<br />
- Fun<br />
- Fast<br />
- Maybe even Work!</blockquote>
<h3>
The Ultimate Moth Hydrofoil System</h3>
I think the best systems will be electronically controlled active
submerged systems. This may not be legal at the moment. (I think after the
Euro 2004 meeting it is). I think it is a sensible direction to go in. Fly
by wire will make the boats easy to sail and need not be too expensive.
Chris Millers control system paper is a excellent piece of work that I think
will be the catalyst for such systems. However active control systems,
(electronic or mechanical) are ruled out of this project because the time
investment to get them working properly is too large.<br />
<br />
If you want the Ultimate system now then buy it. It is very good and this
project says big up and Re Spect (Alli-G style). However the beauty of the
Moth class is that there is always some silly bastard with a silly idea, that
sometimes works and changes the sport of sailing! (Mostly however it is just
a silly bastard idea.)<br />
<h3>
The Diamond Hydrofoil System.</h3>
This is a design that I think is well worth a try. The concept is to stick
a tapered surface piercing V foil on the dagger board that will require no
active control system. The faster you go the higher you ride. A T foil rudder
will provide longitudinal stability. The design has two Vs that form a diamond
that can be glued on to the dagger board.<br />
<br />
The tactics of Hydrofoil racing mean that you have to get out of the water
earlier (in less wind) than your competitors. Therefore we need bigger foils
than the active systems. The drag of these big foils will be reduced once the
ride height increases and the top of the diamond is out the water.<br />
<br />
The boat will need to fly all the time to be competitive. If the wind is
so light that you can not fly then the race will probably be canceled. This
system will sail with the hull down but it will probably not be competitive.
Only active systems that can feather foils will have a chance against
conventional Moths in non foiling winds. This design may feather its foils
if the sailor sits forward for a traditional bow down trim. The wind range
under 7 knots will be a problem, but who wants to sail in this wind.<br />
<br />
Ventilation (air attaching to the foils) may be a problem but we do not
know until we try. I think the pressures are low so it may be OK. We can
always put small ventilation barriers on the foils to help. Maybe the sailor
can bounce the boat to clear the air? I think I have to solve this when it
happens and not before.<br />
<br />
The mail foil will generate most of the lift, so its of attack is critical.
The deck fastening and the shape of its root need to allow it to be fastened at
different angles. With sea trials it will become clear where it should be
fastened and this position may vary in different wind strengths.<br />
The rear T foil will generate lift if the sailor sits back in the boat.
The forward foil may jump out of the water in this case, which may or may not
be a problem. The proportions of the foils and the sailing technique will
evolve. I will try to make a good first guess and develop from there.
Therefore is is a waste of time to build expensive high quality foils because
after the first sails the hack saw may come out. The build system must
therefore be cheap and easy. Once the proportions are settled then high
quality foils can be made.<br />
<br />
When this system works we do not need much of a boat. Maybe the boat does
not need to float much. In this case it can be very small and light and easy
to build. Its shape and fairness will be irrelevant the important factors will
be weight, strength and windage. This may mean that the expense of female
molds will be consigned to history..<br />
<br />
My conversion plan consists of a new rudder and new centerboard with a deck
fastening system on the boat. I will keep my old foils in tact so that the
boat can be sailed normally. Therefore the cost and risk of conversion is
small and I can continue sailing my boat.<br />
<br />
The first design will go for control to allow the boat to be driven hard.
T-Foils on the rudder dramatically increased the speed of Moths not because of
hydrodynamic reasons but because you could sheet in and drive the boat down
wind rather than tickle it to the leeward mark. Therefore again the ultimate
low drag system is to come later. What we need now is a stable system that
lifts early and can be driven hard while you look up to see which way the
fleet is going up the beet or where the camera boat is on the reach.<br />
<h3>
Basic Calculations</h3>
If you think these calculations and assumptions are ridicules then you are
probably right, so mail me and I can include your thoughts in this project.<br />
<h4>
Get out the water first.</h4>
The foil system needs to generate more lift that the competition a low
speed, which means low wind. This is a bit tricky because the speed is
important for lift and lift is related to drag. Therefore if we have a huge
foil system we will have more drag and not go as fast as the competition. If
we do not go as fast then the velocity squared thing means we should have
stayed in the bar. Therefore in this critical condition we need to have more
area and/or a larger angle of attack, and not too much more drag. If we can do
this then we are out the water and the drag drops, speed increases, and we
wave good bye.<br />
<pre>Area of competition
===================
The aussie system data I have is:
"Main foil is 90cm wide with a chord of 12cm
The rudder is 52cm wide with the same chord."
=> 0.9 * 0.12 + 0.52 * 0.12 = 0.1704 sqm.
</pre>
This is the projected area. If we have have 45 degree foils then we need
sqrt(2) 1.414 times more physical area.<br />
Fixed foils have no flaps so the angle of attack is related to boat trim.
Therefore we want to change our trim with the use of our ballast (where we
sit). That means that is we sit back in the boat the main foil will ride
up and increase the angle of attack of the system. We can then sit forward a
bit to put pressure on the main foil and lift the boat out the water.<br />
<pre>Assuming:
1. We can not generate as much lift coefficient (angle of attack) as active
systems. assume 75 % of the lift coefficient.
2. We have more wetted area and more drag therefore we go 10% slower. Which
is 20% less lift.
SameArea = 1.2 * 0.1704 / 0.75 = 0.273
Our design area = more then present systems (because we want to get out the water first) = 0.3 msq
Therefore the submerged system should have a projected area of about 0.3 msq.
</pre>
<h4>
Stable Full speed</h4>
<a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a><a href="https://www.blogger.com/blogger.g?blogID=2860987473436010329" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"></a>In the full speed condition the lift is the weight of the boat and
sailor. The area of the submerged system is constant and the therefore the
coefficient of lift is very small to compensate the velocity squared effect.<br />
<br />
At full speed (what ever that is) we need a bit of main foil in the water
for stability and the aft foil must remain submerged. Ventilation is our
problem so the pressure on the main foil should be low to reduce this
problem. Our area is now low because most of the diamond is out of the
water. The boat ideally should not jump when it hits a wave because of
ventilation and control reasons. Therefore I think that the main foil should
lift the boat and the rear foil should be an always submerged stabilizer.
This keeps some pressure on the main foil to stop it jumping. It also means
that the the rudder has more draft than the main foil to keep it wet.<br />
<pre>Assuming:
1. Main foil generates 75% of the lift.
2. We need about a 1/4 of the area of the submerged system (that is now
dragging huge foils around) for the same lift.
3. 1.414 times more area for the main foil is counted because it is 45 degrees
to the water.
NeededArea = 0.1704 * 0.25 = 0.0426 msq
RearFoilArea = 0.0426 msq
At a 10cm cord that makes a ~45 cm span foil.
Going back to the "Get out the water first" case.
Main foil total projected area = 0.3 - 0.0426 = 0.2574 msq
At 45 degrees this makes a physical area of:
0.2574 * 1.414 = 0.364 msq
Starting at an 8cm cord and finishing at a 30 cm cord the foil needs to be:
( 0.08 + 0.3 ) / 2 = AverageCord = 0.19
0.364 / 0.19 = 1.916 m long
EachSideOfDiamond = 2 / 4 = 0.50
Therefore our main foil dimensions are.
Main foil Diamond.
Top of diamond cord = 30 cm
Bottom of Diamond cord = 8cm
Each side of diamond length = 50 cm
</pre>
<h4>
What would happen if this works?</h4>
Assuming this design works and we are out of the water and sailing lets do
a reality check calculation for a sailing at 15 Knots condition.<br />
<pre>V = 15 Knots is aprox 8 m /s^2
L = Required lift = 100 KG = 1000
d = Density of water.
CL = 0.2 This is a nice CL Number.
L = ½ d V^2 S CL
1000 = 0.5 * 1000 * 8*8 * S * 0.2
S = 0.156
This is about half the main foils projected area.
Assuming 75% of the lift comes from the Diamond.
Projected area from main foil is 0.156 * 0.75 = 0.117 sqm
The projected area of the lower half = 0.7 * (0.08 + 0.19) / 2 = 0.0945
Therefore at 15 Knots we would be running with the diamond about 75% submerged.
</pre>
The 15 knot case assumes a lot but it is realistic, so we can conclude
our reality check is OK. The CL gives us a lot of room for adjustment.
We can adjust the CL by raking the main foil forward. Increasing the CL
may make ventilation more of a problem, but would reduce our wetter area and
help us get out of the water earlier. This is a subject that is very complex
but it could be examined further with maths and computer modeling. The control
of the boat and its behavior can never be fully modeled, as it
is far to complex. I feel is cheaper and quicker to use reality rather than
virtual reality from this point forward.<br />
<br />
My feeling is that the main foil will need to be raked forward about 3
degrees to help us get out of the water. So it is important that the mounting
on the boat allows this adjustment.<br />
<br />
The angle of attack at the top of the diamond could be more than that of the
bottom. We could assume that the bottom should run level with and the top
should have a small angle of attack. Our mail foil will have a flat
underside to make it easy to shape and asymmetric. Therefore the bottom of the
diamond could be parallel to the static water line and the top could have a
slight angle of attack to make it generate loads of lift at low speed. This
however means there is no chance to feather the foils at non foiling speed and
it should also generate so much drag that the boat can never get out the
water. Therefore the bottom of the foils will be flat and parallel to the
static waterline of the boat. This also makes the build easy.<br />
<br />
We have our basic dimensions which fit with practical considerations.
We might have loads more lift than the competition at low speed so we can ride
out the water first and are therefore faster. We might also have a stable
hight control system at high speed so we can drive the boat harder with less
wetted area in strong winds. Sounds cool but will it work? I have no idea
but I think there is only one way to find out.<br />
<h3>
Drawings</h3>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhJ1LY9VedJuoakCLqDE9Mz2FOkQixrDSR8cn5IFiKTUZgDZZ30MsFaUbBlR5C2ZnSdekhu-PlnR42jdELDz2BVenvD4PfFjKVg7kaMF8J3krLlmLSiEDMQrMubMXp9DzQg2EbJ8Y1i5CA7/s1600/profile.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhJ1LY9VedJuoakCLqDE9Mz2FOkQixrDSR8cn5IFiKTUZgDZZ30MsFaUbBlR5C2ZnSdekhu-PlnR42jdELDz2BVenvD4PfFjKVg7kaMF8J3krLlmLSiEDMQrMubMXp9DzQg2EbJ8Y1i5CA7/s1600/profile.png" height="266" width="400" /></a></div>
<h3>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj9VTRcn3GqdXexoqEtGb_mzO-xRbsxcJctex99MS32qon37fpMhG-KecRsJ7stps5cawk9iLyjzFjgBb6rtSNb9blje5tOxluroBWLTb_NZ46u8fq8EM5LgNcJD-OazrZ_I36-PwVI0Hk3/s1600/section.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj9VTRcn3GqdXexoqEtGb_mzO-xRbsxcJctex99MS32qon37fpMhG-KecRsJ7stps5cawk9iLyjzFjgBb6rtSNb9blje5tOxluroBWLTb_NZ46u8fq8EM5LgNcJD-OazrZ_I36-PwVI0Hk3/s1600/section.png" height="400" width="332" /></a></div>
</h3>
<br />
<h3>
Diamond Foils Sections</h3>
I will use the NACA 64 series foil section because I have data for it. I is
also a nice section with the max thickness far back for good laminar flow.
This also helps with the even pressure distribution required for surface
percing foils, (to help prevent ventilation).<br />
<br />
To make the foils easy to build the slight concave aft will be run straight
with a sanding board. I also have to adjust the section so that it is 20mm
thick. This makes is too fat at the bottom and too thin at the top but easy to
shape out of a 20mm thick sheet of foam.<br />
<br />
<table border="1" cellspacing="0" cols="7" frame="VOID" rules="GROUPS">
<colgroup><col width="97"></col><col width="101"></col><col width="101"></col><col width="101"></col><col width="101"></col><col width="101"></col><col width="101"></col></colgroup>
<tbody>
<tr>
<td align="LEFT" colspan="6" height="22" width="97"><b><span style="font-size: small;">NACA 64-012 Section offsets and modified for 20mm thick foam.</span></b></td>
</tr>
<tr>
<td align="LEFT" height="19"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">Y</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">X</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">X</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">X</span></b></td>
</tr>
<tr>
<td align="CENTER" height="19"><b><span style="font-family: Times New Roman;">X %</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">Y 12%</span></b></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">20mm Thick</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">100mm Cord</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">150mm Cord</span></b></td>
<td align="CENTER"><b><span style="font-family: Times New Roman;">280mm Cord</span></b></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="0"><span style="font-family: Times New Roman;">0.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="0"><span style="font-family: Times New Roman;">.000</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0"><span style="font-family: Times New Roman;">0.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0"><span style="font-family: Times New Roman;">0.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0"><span style="font-family: Times New Roman;">0.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0"><span style="font-family: Times New Roman;">0.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="0.5"><span style="font-family: Times New Roman;">0.50</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="0.978"><span style="font-family: Times New Roman;">.978</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.63"><span style="font-family: Times New Roman;">1.630</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0.5"><span style="font-family: Times New Roman;">0.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0.75"><span style="font-family: Times New Roman;">0.750</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.4"><span style="font-family: Times New Roman;">1.400</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="0.75"><span style="font-family: Times New Roman;">0.75</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="1.179"><span style="font-family: Times New Roman;">1.179</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.965"><span style="font-family: Times New Roman;">1.965</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0.75"><span style="font-family: Times New Roman;">0.750</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.125"><span style="font-family: Times New Roman;">1.125</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="2.1"><span style="font-family: Times New Roman;">2.100</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="1.25"><span style="font-family: Times New Roman;">1.25</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="1.49"><span style="font-family: Times New Roman;">1.490</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="2.48333333333333"><span style="font-family: Times New Roman;">2.483</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.25"><span style="font-family: Times New Roman;">1.250</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.875"><span style="font-family: Times New Roman;">1.875</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="3.5"><span style="font-family: Times New Roman;">3.500</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="2.25"><span style="font-family: Times New Roman;">2.25</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="2.035"><span style="font-family: Times New Roman;">2.035</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="3.39166666666667"><span style="font-family: Times New Roman;">3.392</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="2.25"><span style="font-family: Times New Roman;">2.250</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="3.375"><span style="font-family: Times New Roman;">3.375</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="6.3"><span style="font-family: Times New Roman;">6.300</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="5"><span style="font-family: Times New Roman;">5.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="2.81"><span style="font-family: Times New Roman;">2.810</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="4.68333333333333"><span style="font-family: Times New Roman;">4.683</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="5"><span style="font-family: Times New Roman;">5.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="7.5"><span style="font-family: Times New Roman;">7.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="14"><span style="font-family: Times New Roman;">14.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="7.5"><span style="font-family: Times New Roman;">7.50</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="3.394"><span style="font-family: Times New Roman;">3.394</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="5.65666666666667"><span style="font-family: Times New Roman;">5.657</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="7.5"><span style="font-family: Times New Roman;">7.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="11.25"><span style="font-family: Times New Roman;">11.250</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="21"><span style="font-family: Times New Roman;">21.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="10"><span style="font-family: Times New Roman;">10.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="3.871"><span style="font-family: Times New Roman;">3.871</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="6.45166666666667"><span style="font-family: Times New Roman;">6.452</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="10"><span style="font-family: Times New Roman;">10.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="15"><span style="font-family: Times New Roman;">15.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="28"><span style="font-family: Times New Roman;">28.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="15"><span style="font-family: Times New Roman;">15.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="4.62"><span style="font-family: Times New Roman;">4.620</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="7.7"><span style="font-family: Times New Roman;">7.700</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="15"><span style="font-family: Times New Roman;">15.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="22.5"><span style="font-family: Times New Roman;">22.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="42"><span style="font-family: Times New Roman;">42.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="20"><span style="font-family: Times New Roman;">20.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.173"><span style="font-family: Times New Roman;">5.173</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="8.62166666666667"><span style="font-family: Times New Roman;">8.622</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="20"><span style="font-family: Times New Roman;">20.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="30"><span style="font-family: Times New Roman;">30.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="56"><span style="font-family: Times New Roman;">56.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="25"><span style="font-family: Times New Roman;">25.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.576"><span style="font-family: Times New Roman;">5.576</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="9.29333333333333"><span style="font-family: Times New Roman;">9.293</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="25"><span style="font-family: Times New Roman;">25.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="37.5"><span style="font-family: Times New Roman;">37.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="70"><span style="font-family: Times New Roman;">70.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="30"><span style="font-family: Times New Roman;">30.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.844"><span style="font-family: Times New Roman;">5.844</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="9.74"><span style="font-family: Times New Roman;">9.740</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="30"><span style="font-family: Times New Roman;">30.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="45"><span style="font-family: Times New Roman;">45.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="84"><span style="font-family: Times New Roman;">84.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="35"><span style="font-family: Times New Roman;">35.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.978"><span style="font-family: Times New Roman;">5.978</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="9.96333333333333"><span style="font-family: Times New Roman;">9.963</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="35"><span style="font-family: Times New Roman;">35.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="52.5"><span style="font-family: Times New Roman;">52.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="98"><span style="font-family: Times New Roman;">98.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="40"><span style="font-family: Times New Roman;">40.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.981"><span style="font-family: Times New Roman;">5.981</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="9.96833333333333"><span style="font-family: Times New Roman;">9.968</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="40"><span style="font-family: Times New Roman;">40.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="60"><span style="font-family: Times New Roman;">60.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="112"><span style="font-family: Times New Roman;">112.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="45"><span style="font-family: Times New Roman;">45.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.798"><span style="font-family: Times New Roman;">5.798</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="9.66333333333333"><span style="font-family: Times New Roman;">9.663</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="45"><span style="font-family: Times New Roman;">45.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="67.5"><span style="font-family: Times New Roman;">67.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="126"><span style="font-family: Times New Roman;">126.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="50"><span style="font-family: Times New Roman;">50.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.48"><span style="font-family: Times New Roman;">5.480</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="9.13333333333333"><span style="font-family: Times New Roman;">9.133</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="50"><span style="font-family: Times New Roman;">50.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="75"><span style="font-family: Times New Roman;">75.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="140"><span style="font-family: Times New Roman;">140.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="55"><span style="font-family: Times New Roman;">55.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="5.056"><span style="font-family: Times New Roman;">5.056</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="8.42666666666667"><span style="font-family: Times New Roman;">8.427</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="55"><span style="font-family: Times New Roman;">55.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="82.5"><span style="font-family: Times New Roman;">82.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="154"><span style="font-family: Times New Roman;">154.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="60"><span style="font-family: Times New Roman;">60.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="4.548"><span style="font-family: Times New Roman;">4.548</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="7.58"><span style="font-family: Times New Roman;">7.580</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="60"><span style="font-family: Times New Roman;">60.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="90"><span style="font-family: Times New Roman;">90.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="168"><span style="font-family: Times New Roman;">168.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="65"><span style="font-family: Times New Roman;">65.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="3.974"><span style="font-family: Times New Roman;">3.974</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="6.62333333333333"><span style="font-family: Times New Roman;">6.623</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="65"><span style="font-family: Times New Roman;">65.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="97.5"><span style="font-family: Times New Roman;">97.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="182"><span style="font-family: Times New Roman;">182.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="70"><span style="font-family: Times New Roman;">70.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="3.35"><span style="font-family: Times New Roman;">3.350</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="5.58333333333333"><span style="font-family: Times New Roman;">5.583</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="70"><span style="font-family: Times New Roman;">70.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="105"><span style="font-family: Times New Roman;">105.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="196"><span style="font-family: Times New Roman;">196.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="75"><span style="font-family: Times New Roman;">75.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="2.695"><span style="font-family: Times New Roman;">2.695</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="4.49166666666667"><span style="font-family: Times New Roman;">4.492</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="75"><span style="font-family: Times New Roman;">75.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="112.5"><span style="font-family: Times New Roman;">112.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="210"><span style="font-family: Times New Roman;">210.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="80"><span style="font-family: Times New Roman;">80.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="2.029"><span style="font-family: Times New Roman;">2.029</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="3.38166666666667"><span style="font-family: Times New Roman;">3.382</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="80"><span style="font-family: Times New Roman;">80.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="120"><span style="font-family: Times New Roman;">120.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="224"><span style="font-family: Times New Roman;">224.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="85"><span style="font-family: Times New Roman;">85.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="1.382"><span style="font-family: Times New Roman;">1.382</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="2.30333333333333"><span style="font-family: Times New Roman;">2.303</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="85"><span style="font-family: Times New Roman;">85.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="127.5"><span style="font-family: Times New Roman;">127.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="238"><span style="font-family: Times New Roman;">238.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="90"><span style="font-family: Times New Roman;">90.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="0.786"><span style="font-family: Times New Roman;">.786</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="1.31"><span style="font-family: Times New Roman;">1.310</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="90"><span style="font-family: Times New Roman;">90.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="135"><span style="font-family: Times New Roman;">135.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="252"><span style="font-family: Times New Roman;">252.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="95"><span style="font-family: Times New Roman;">95.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="0.288"><span style="font-family: Times New Roman;">.288</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0.48"><span style="font-family: Times New Roman;">0.480</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="95"><span style="font-family: Times New Roman;">95.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="142.5"><span style="font-family: Times New Roman;">142.500</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="266"><span style="font-family: Times New Roman;">266.000</span></td>
</tr>
<tr>
<td align="RIGHT" height="19" sdnum="2057;0;0.00" sdval="100"><span style="font-family: Times New Roman;">100.00</span></td>
<td align="RIGHT" sdnum="2057;0;#,###.000" sdval="0"><span style="font-family: Times New Roman;">.000</span></td>
<td align="LEFT"><span style="font-family: Times New Roman;"><br /></span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="0"><span style="font-family: Times New Roman;">0.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="100"><span style="font-family: Times New Roman;">100.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="150"><span style="font-family: Times New Roman;">150.000</span></td>
<td align="RIGHT" sdnum="2057;0;0.000" sdval="280"><span style="font-family: Times New Roman;">280.000</span></td>
</tr>
</tbody>
</table>
<br />
<h3>
Boat Fastening.</h3>
<br />
It would be of great benefit to be able to adjust the angle of rake, and
therefore the angle attack, of the diamond foil. This can be done with a pivot
on the underside of the hull and a simple control system in the boat. I rope
and jammer system to tie the top of the main foil back (and therefore rake
forward) will be enough.<br />
<h3>
Build Design</h3>
Foils are to be shaped out of high density foam and covered in one layer of
UD and one layer of cloth. More layers of UD to be added where needed.<br />
Due to the fact that the Diamond is effectively a fully supported beam and
only 50cm long I will same some money an use Glass fiber for this not
Carbon.<br />
<h3>
Actual Build</h3>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgKKjftPlMu9QO4bnCuQNiDblB6iMEdS7I8NkPv9b6hcPthRI3XLUz4g97BOCHL9B-7tVx2sMFlFImjk7Y6-8_f-ggFefpXZmGDezYsvm9eonNBJayPQ46VmIhUbDyxdnATctIAy02GPOZH/s1600/CheapLabour.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgKKjftPlMu9QO4bnCuQNiDblB6iMEdS7I8NkPv9b6hcPthRI3XLUz4g97BOCHL9B-7tVx2sMFlFImjk7Y6-8_f-ggFefpXZmGDezYsvm9eonNBJayPQ46VmIhUbDyxdnATctIAy02GPOZH/s1600/CheapLabour.JPG" height="400" width="300" /> </a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhgNrXeAQpPZsForM-ocy-cyaKTkCbUtfD7cgptdWT5pKlMDuswKZzFrZi5c7NVdoEK1m2nrBRkt3_VeuGJDHx8w-Ajwg0Hw1NvPn1ySc1F0mbnJOBSbIb9z1euBCdk1EgUlazwMEWioGhN/s1600/Bits.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhgNrXeAQpPZsForM-ocy-cyaKTkCbUtfD7cgptdWT5pKlMDuswKZzFrZi5c7NVdoEK1m2nrBRkt3_VeuGJDHx8w-Ajwg0Hw1NvPn1ySc1F0mbnJOBSbIb9z1euBCdk1EgUlazwMEWioGhN/s1600/Bits.JPG" height="300" width="400" /></a></div>
<h3>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjTuGUv_389Ic4dzFLIWtU64OMbzQPMkVTNkSqdE9hN06PmvoJUHCwuGf7WIevdBWgnwagZyqLsLJleZHa5K7vk4OiMwpTKqylVikupV61M08_IxRMSHsJTYHQahnRqAvayiTSYAlpMhclL/s1600/ReadyForPaint.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjTuGUv_389Ic4dzFLIWtU64OMbzQPMkVTNkSqdE9hN06PmvoJUHCwuGf7WIevdBWgnwagZyqLsLJleZHa5K7vk4OiMwpTKqylVikupV61M08_IxRMSHsJTYHQahnRqAvayiTSYAlpMhclL/s1600/ReadyForPaint.JPG" height="400" width="300" /> </a></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgUPRV_k7yIOtPB9P6z7We3ioBMlqkE3TxuDq3lukxF9kjwJ1ef2L4dwFmfc0__LTEFkd-YYMUturlxwn9JL7psfxvg7DfwBWMTcrVnPS54VNOKs3p_m5NG03FL04U95YFQUHR2rvqDWj_v/s1600/Done.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgUPRV_k7yIOtPB9P6z7We3ioBMlqkE3TxuDq3lukxF9kjwJ1ef2L4dwFmfc0__LTEFkd-YYMUturlxwn9JL7psfxvg7DfwBWMTcrVnPS54VNOKs3p_m5NG03FL04U95YFQUHR2rvqDWj_v/s1600/Done.JPG" height="300" width="400" /></a></div>
</h3>
<div align="center">
</div>
<div align="center">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div align="center">
</div>
<div align="center">
</div>
<h3>
Sea Trials</h3>
<div align="center">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEje5hGk_svqW-fn2xNK4QHs7yUNfl0DCIq7R-82oRAiZ4u58Hv3hJ54XU5JlKa1dsM8jBv_7I9PImkHqNYnTpQqL-ipp077oHPNTfJ_lqqXs9xs-iLrp2asUI-2HVoJL9iBo-J5Syjq5DIM/s1600/TankTest.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEje5hGk_svqW-fn2xNK4QHs7yUNfl0DCIq7R-82oRAiZ4u58Hv3hJ54XU5JlKa1dsM8jBv_7I9PImkHqNYnTpQqL-ipp077oHPNTfJ_lqqXs9xs-iLrp2asUI-2HVoJL9iBo-J5Syjq5DIM/s1600/TankTest.jpg" height="346" width="400" /></a></div>
The Diamond and rudder were fitted to my 11 year old Aussie Axeman
(Tomahawk GBR 4019), in the week before the European Championships at Lake
Garda (August 2005). The fastening system was simple but worked as intended
allowing the Diamond to have 0 to 8 degrees of angle of attack.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhvemu1wT0RH2QSPxIDDW-ziqJC9bKaYR8gK4-MM_o4QyoBUbQJSiNECIi_Tma7430rMvMf_L4Uyd_rO6tzOt4fcaZrHHcD4utK4dH31zFy99lBpp6MPf9kt0qcjR-ibrSWbp0Kz-sQTN7K/s1600/CheckTheHydrodynamics.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhvemu1wT0RH2QSPxIDDW-ziqJC9bKaYR8gK4-MM_o4QyoBUbQJSiNECIi_Tma7430rMvMf_L4Uyd_rO6tzOt4fcaZrHHcD4utK4dH31zFy99lBpp6MPf9kt0qcjR-ibrSWbp0Kz-sQTN7K/s1600/CheckTheHydrodynamics.jpg" height="395" width="400" /></a></div>
<div align="center">
</div>
<div align="center">
</div>
<br />
<br />
<div class="" style="clear: both; text-align: left;">
The first sail started as the South wind came in. This meant I launched in no
wind and then the breeze increase steadily to a force 3-4. The boat behaved
just like a normal low rider but obviously was a bit slower due to the extra
wetted area of the foils. As the wind increased she started to lift on a
reach. The boat lifted better with a lower angle of attack (4 degrees). The
larger angle (8 degrees) caused too much drag and as lift is the square root of
velocity so speed not area or angle of attack are important. Therefore less
drag is much more important than I thought so smaller foils, at less angle of
attack could be better at getting the boat out of the water!?...</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgqAOpQOGJDxbQNuobLxM0bfDS5PF5kIleOl2nlo0ZQsUBPF5a7-2ctZ47JpNcXiHMT17qHVatjmE2-WoAciYdBFIl8dQLXNMdmdzIzN1Uey3mVFBRukuMvoTqTYOK0TB3G2EglEoFsYV4r/s1600/TheLaunch.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgqAOpQOGJDxbQNuobLxM0bfDS5PF5kIleOl2nlo0ZQsUBPF5a7-2ctZ47JpNcXiHMT17qHVatjmE2-WoAciYdBFIl8dQLXNMdmdzIzN1Uey3mVFBRukuMvoTqTYOK0TB3G2EglEoFsYV4r/s1600/TheLaunch.jpg" height="265" width="400" /></a></div>
<br />
<br />
<div align="center">
</div>
As the top of the diamond got to the surface a large ventilation type
drag and stall caused the boat to drop back into the water. I put this down
to ventilation at first.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEimNWFu-_T93dFWK48CcX8PUEoHPBL556RlmHuGK4wii685PKWJN-EcH5oS_9W2Szn9ZQad188PO9gWeIn_8KtQb8cV-9FyzGzTgr8Q5qSAwrPXKqU7ZKlLjuVQbRaX0tJ-7RI1FOuy5XTE/s1600/GoingUp.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEimNWFu-_T93dFWK48CcX8PUEoHPBL556RlmHuGK4wii685PKWJN-EcH5oS_9W2Szn9ZQad188PO9gWeIn_8KtQb8cV-9FyzGzTgr8Q5qSAwrPXKqU7ZKlLjuVQbRaX0tJ-7RI1FOuy5XTE/s1600/GoingUp.jpg" height="265" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEii6P3b8SfohsuUKTFfc0xHlhjffGVJLUY86ZZJudpqMeS2iXvYgOg_QHTaEaDwRFPyQs6ICOjRfQTRv1LjtF9BGxn9HBz6gVjKNHI0W6xFEJLYb49STWW3SGVDyr7q4uPpL_43XP9D3678/s1600/Stall.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEii6P3b8SfohsuUKTFfc0xHlhjffGVJLUY86ZZJudpqMeS2iXvYgOg_QHTaEaDwRFPyQs6ICOjRfQTRv1LjtF9BGxn9HBz6gVjKNHI0W6xFEJLYb49STWW3SGVDyr7q4uPpL_43XP9D3678/s1600/Stall.jpg" height="265" width="400" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjPEe3nh3YeTDRzBdVsmTXhSmMDOZfa_C7Bc8c419cNUqk1U-aX3Kfn1WCu2XUsBearUD4-2DeKnZ-ouKGvP6ZLXNn7TzUez_cMDyARIb31tFW1GNLsKYZicemQMqSB_536N0GIsYroLV2s/s1600/GoingDown.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjPEe3nh3YeTDRzBdVsmTXhSmMDOZfa_C7Bc8c419cNUqk1U-aX3Kfn1WCu2XUsBearUD4-2DeKnZ-ouKGvP6ZLXNn7TzUez_cMDyARIb31tFW1GNLsKYZicemQMqSB_536N0GIsYroLV2s/s1600/GoingDown.jpg" height="265" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg8d4Xgml7VS_sbck7USoJJHJf6EYTVidMGmtN95xmTvQT8Abs0oY32e3S1zoNa-7XlnsuNsgo4eCdKpaaVk5TKY9ajVu6cHkwnANmkfMuuBKmJA63bU8SFs5q-8cZABp8BjwBCr5q7uGtg/s1600/Landing.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg8d4Xgml7VS_sbck7USoJJHJf6EYTVidMGmtN95xmTvQT8Abs0oY32e3S1zoNa-7XlnsuNsgo4eCdKpaaVk5TKY9ajVu6cHkwnANmkfMuuBKmJA63bU8SFs5q-8cZABp8BjwBCr5q7uGtg/s1600/Landing.jpg" height="265" width="400" /></a></div>
<br />
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
</div>
After a few ups and downs a large bang ended my sail.<br />
<div align="center">
</div>
<div align="center">
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg92m-uVwciOv_-pC-CNgdHmcpmNEPWhH8hAHAwDyUOX3TZlbAIeekozOXLm8QQ83Oe8FBIipQFWzTQknTLcIaQ3jiiULc-Tga_Z5haBOTfDdAFGVqnjmycsLZ1aFJIUMGTDajkvrUWnQWS/s1600/WhatWasThat.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg92m-uVwciOv_-pC-CNgdHmcpmNEPWhH8hAHAwDyUOX3TZlbAIeekozOXLm8QQ83Oe8FBIipQFWzTQknTLcIaQ3jiiULc-Tga_Z5haBOTfDdAFGVqnjmycsLZ1aFJIUMGTDajkvrUWnQWS/s1600/WhatWasThat.jpg" height="265" width="400" /> </a></div>
<br />
</div>
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizOfN-tFGVAXZbVsPfO8I-bGRQ5XURoydKXwJQ0ayHjaEjl0Gk0Adzp_cvUHBe7DPzmty0AkzWAxPWhh16WcHewQcjBRBEgraH-wkyM-BwdWiGX__KPWjZMY9ZsQoPSXYpOjsnTh2cZhqi/s1600/SomethingIsNotRight.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizOfN-tFGVAXZbVsPfO8I-bGRQ5XURoydKXwJQ0ayHjaEjl0Gk0Adzp_cvUHBe7DPzmty0AkzWAxPWhh16WcHewQcjBRBEgraH-wkyM-BwdWiGX__KPWjZMY9ZsQoPSXYpOjsnTh2cZhqi/s1600/SomethingIsNotRight.jpg" height="265" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjFbCh7xcitYmKh_pL9iATbPpeYD1RP3Jy5h_ICCvue2ueS3WqP0I5B31WbvE2jNfWP40et2dwXDKXrqP0hu4qWi-D0Wqq3lLGNs3MXXU6AHUjjfpSvKXFJBV0LjRvCRWp-Xf012H_APIsB/s1600/WhereHasItGone.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjFbCh7xcitYmKh_pL9iATbPpeYD1RP3Jy5h_ICCvue2ueS3WqP0I5B31WbvE2jNfWP40et2dwXDKXrqP0hu4qWi-D0Wqq3lLGNs3MXXU6AHUjjfpSvKXFJBV0LjRvCRWp-Xf012H_APIsB/s1600/WhereHasItGone.jpg" height="265" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgMeHIosBBlQxfkbywuqmd6GWyUvb3vIqbbOOSGQrNrbO0GjUkC1AOsV_VhipgZPyiCTfiRfkC7qLN9z179BDrvWmg6LKMRMg_8lTjKzQN3PhLdfJufBauGJuf8eO8q0PHNMZwbjr-gTD3i/s1600/ThatIsNotRight.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgMeHIosBBlQxfkbywuqmd6GWyUvb3vIqbbOOSGQrNrbO0GjUkC1AOsV_VhipgZPyiCTfiRfkC7qLN9z179BDrvWmg6LKMRMg_8lTjKzQN3PhLdfJufBauGJuf8eO8q0PHNMZwbjr-gTD3i/s1600/ThatIsNotRight.jpg" height="265" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjLwJfuJXpgEWQs6YVCWBqQB9fnnmo7WvcS9wNp26f5Nmy4X2S2GIyxe-U5UjpsF5qdUC3I9REfQ993axLPHLy5GiU3KU1MRrwog5_cRFKym5fU-yKuzmpKgV_5CpSHHOMwYr9TcX3EYELu/s1600/Woops.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjLwJfuJXpgEWQs6YVCWBqQB9fnnmo7WvcS9wNp26f5Nmy4X2S2GIyxe-U5UjpsF5qdUC3I9REfQ993axLPHLy5GiU3KU1MRrwog5_cRFKym5fU-yKuzmpKgV_5CpSHHOMwYr9TcX3EYELu/s1600/Woops.jpg" height="265" width="400" /></a></div>
<br />
<br />
<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh7m2G4oKLcyN3Hm9Zd-_ilWkGhQmp_kZfo0DHH6JDPJG7GNdu_qsI6z-wyc2M485hBO6twFvTW2ebNqK5ARqR46fu0C2u1W62WVZbapnvfwEbU2DfO5pFduyrK_8PxMonfX-qD3MyLoGrT/s1600/GameOver.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh7m2G4oKLcyN3Hm9Zd-_ilWkGhQmp_kZfo0DHH6JDPJG7GNdu_qsI6z-wyc2M485hBO6twFvTW2ebNqK5ARqR46fu0C2u1W62WVZbapnvfwEbU2DfO5pFduyrK_8PxMonfX-qD3MyLoGrT/s1600/GameOver.jpg" height="265" width="400" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhH-XEvEvdTOc8MNdI7ItaptrmRX2pbb9x693Gsx2r1hrqjnynfsw8djWGxo3459NZ631PjmVWYZx3puWNcmWTWrJycRNMwuM0O2lTei2W95cpDa1tF6mwE9EdRP85CJl1y1I9nQn10OmKQ/s1600/Shit.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhH-XEvEvdTOc8MNdI7ItaptrmRX2pbb9x693Gsx2r1hrqjnynfsw8djWGxo3459NZ631PjmVWYZx3puWNcmWTWrJycRNMwuM0O2lTei2W95cpDa1tF6mwE9EdRP85CJl1y1I9nQn10OmKQ/s1600/Shit.jpg" height="265" width="400" /></a></div>
<br />
<br />
I decided to repair the Diamond that had failed at the junction at its top,
and fit ventilation fences to the upper foil to stop the drop into the water
as soon as the diamond top cleared the water.<br />
<br />
The next sail started in a force 3 and the same drop into the water occurred.
On studying the water more closely I got the impression that it was not just a
ventilation stall, but a complex vortex that was being generated. This vortex
was a result of the 3 foil surfaces and the water air interface. It produced
a big drag that caused the boat to slow and drop and air to be sucked down into
the water. As the wind increased there was enough power to get thought
this vortex drag hump and start flying with the diamond behaving as a surface
piercing V foil. Then the problem was ride height control I got the impression
that this was mainly solvable with technique but did not get the hang of it
before the next crack in the top Diamond junction got to a critical length and
I had to stop. At this point I feathered the foil for safety and sailed the
boat back the the shore and it behaved like a normal low rider<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgME86G7Ap6AzbKNZcmO2nitSA088XLVRA3BGeKsar1nNFo24dxXF3qk2qGyGXb2CD5MdAENcPuleJmvBfaTf_ycrOMueZAPm6cKmZ_08TqvuU0PKUkTBsi7DRQfdy8R-NdA7CLtW6LElM2/s1600/Flying.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgME86G7Ap6AzbKNZcmO2nitSA088XLVRA3BGeKsar1nNFo24dxXF3qk2qGyGXb2CD5MdAENcPuleJmvBfaTf_ycrOMueZAPm6cKmZ_08TqvuU0PKUkTBsi7DRQfdy8R-NdA7CLtW6LElM2/s1600/Flying.jpg" height="336" width="400" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjYlyLZ6yYA3sz4mDGksG_vhBVGlNo9yTBuGN5RYuj5QVcWcwIRdP8vEgqx4ypgfnBq2YinZ-LOaqOh4OqPw-pq_fnjCftP7DyYYI3j8buooJ_c4noJpbWVzUk4BZ9tHgdKitPV1-dT0cSv/s1600/WipeOut.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjYlyLZ6yYA3sz4mDGksG_vhBVGlNo9yTBuGN5RYuj5QVcWcwIRdP8vEgqx4ypgfnBq2YinZ-LOaqOh4OqPw-pq_fnjCftP7DyYYI3j8buooJ_c4noJpbWVzUk4BZ9tHgdKitPV1-dT0cSv/s1600/WipeOut.jpg" height="350" width="400" /></a></div>
.<br />
<div align="center">
</div>
<div align="center">
</div>
After I repaired the top junction again I sailed in less wind and so did
not have enough power to get passed the drag hump and so porpoised up to the
vortex generation height the the boat dropped down again.<br />
<h3>
Conclusion</h3>
I did manage to get the Diamond nearly clear of the water and
had some proper crashes from high altitudes, although I was not in control
is was fun. I could also switch off the diamond and make the boat behave
like a normal Moth. With development of sailing technique and the diamond
dimensions a stable ride height may be possible. The drag hump problem would
need to be understood better and solved as it is a speed killer and will make
the design uncompetative.<br />
<h4>
Cheap?</h4>
The project cost me about 600 Euro and half of this was the high density
foam. Therefore if a more accurate and cheaper build technique is well worth
investigating. Hot wiring cheap low density foam could half the cost of the
project and produce more accurate sections. I am not sure if I achieved the
cheap design requirement.<br />
<h4>
Fun?</h4>
The project was a lot of fun and cost me about 100 hours of build time.
Therefore I feel it was worth while, and I archived the fun requirement.<br />
<h4>
Fast?</h4>
If is not easy to build a prototype that can compete with 3 years of
development. The other hydrofoil boats at the front of the fleet are a lot faster.
This system is not too far off working but still needs development to make it
competitive with low riders. I do not think it will ever be competitive
with the modern hydrofoilers. Therefore I think that it did not achieve the
fast design requirement.<br />
<h4>
Maybe Even Work?</h4>
For a first go a lot of things worked surprisingly well but I decided to low
ride for the European Championship event as the system was not really race
ready. I could have turned it of and sailed the boat as low rider and turned it
on for the reaches, but I had the opportunity to race competitively against a fleet
of Moths so I thought that would be more interesting. I can splash
around on my own in Austria at any time. I nearly achieved the Work requirement.<br />
<br />
This project was a lot of fun and I have enjoyed it but I will put my future
energy into copying the existing systems rather than developing version 2 of the
diamond. Thanks a lot to everyone that helped me to do this experiment
especialy Adam May that made it possible. This has been a fun project with
input and interest from a lot of people and that is what the Moth class is
about. This is probably the end of the Diamond story, but I hope you have
enjoyed reading about it.<br />
<h2>
</h2>
<h2>
Discussion</h2>
<pre>Chris Miller wrote on 06.09.204:
hi,
read thought your paper, looks good. i tried a similar design, but instead
of a diamond i used a V. the problem was the V was not big enough (two 40 cm
parts). i used that length since it was what i had.
a note on your performance evaluations, when you compare the the drag with
the T foil type you say that the drag will be higher, i disagree. There is
one thing you don't take into consideration, there is drag from the
dagger-board in the T foil design, where as the diamond design has no
dagger-board. This means that although the drag from the vertical lifting
surfaces is higher, they are also acting as horizontal lifting surfaces.
The total immersed areas are similar when you include the dagger-board.
However there is an extra surface piecing element which is hard to predict
the drag from.
overall i really like the design, i think people will like sailing it
since you are using body weight position to control the fly height and
pitch of the boat. it will be very much like trimming a current boat for
pitch.
i think i might go and build a set this week. carve them out of wood, then
cover in carbon.
chris
Doug Culnane Replied on 06.09.2004:
I think you are right that the horizontal component is complex and needs to
be considered. I was thinking on the U-Bahn this morning that this design
will work if sailed flat but the traditional heeled to windward state may
be a disaster. However this stuff is so experimental that I think it needs
to be tested to find out what the real problems are. Unfortunately my
boat is in the UK so I can not test it until the Europeans at Garda. If
you do test it send me pictures and your thoughts.
Thanks for your response
Doug
Adam May wrote on 07.09.2004
Hi there Doug. Interesting stuff. The really scary thing is that I think it
might just work!
A few points though: (I know you've made compromises according to your
brief, but I'll come at it from the Olympic prep angle and we'll meet in the
middle!)
I was worried that windward performance would be poor. The conventional (if
you can call them that) foilers are not good upwind when first foiling, but
in more breeze heel to windward and utilise some of the foil lift to help
against leeway, thus achieving good tacking angles in a breeze. You will
need to be careful to always stay upright in order to achieve some element
of ride height adjustment. But on pondering this further, I've found you
actually run very consistent speed upwind, and very little wand or tiller
movement is required. I think your system could heel to windward, and you
would just have a course, one or two foils in the water lifting system. Body
movement, steering, and sheeting would probably be okay. Certainly Graham
Vials was fine upwind with Linton's first experimental set of foils. He had
no adjustment on the rudder foil, just a big flap on the main foil, but the
linkage wasn't very good, so it didn't move much anyway. He could just sail
it upwind fine on body movement alone.
My main foil was one of the largest, and a more average main foil size is :
85cm / 80cm. 1st in the Euros was 80cm, 2nd 85cm and 3rd, 90cm..... John
Ilet is looking at doing all further foil sets at sizes of 85cm main foil
and 65cm rudder (spans).
Rudder and gantry loads are huge - do not underestimate!
The current foilers are very stable once flying, but they have got a 80cm
main foil, and 50/60cm rudder foil help dampen the roll. I'm worried you
will not be as stable once up at speed. I'd be tempted to start with an over
span rudder foil to possibly help with this early on, and then cut down from
there.
The relative angle of main lifting foil to rudder foil is quite crucial, and
an element of adjustability there would help. Possibly not practical for
you, but my gantry is bolted on and I have a few different sizes of wedges
that I use under the bottom support to fine tune the rudder foil angle
relative to the main foil. Currently I'm getting too much lift, and have to
sit a long way back. I'll try and measure the angles, and then we can figure
out the differences, and get yours close first time!
The main centreboard vertical element can be much smaller in chord. The Ilet
ones went to a 12cm chord because the boat was getting blown over it once up
using a normal size foil.
Once up does it fall into the multihull issue that Brett Burvills boat had?
A silly point I know but the class needs to encourage foilers of all sorts
and a general acceptance of all concepts should be sort. The class doesn't
seem to worry about the wand system but I wouldn't be surprised if the rules
thing gets brought up at some point. I think we should allow any configs
though!
The more I think about it, the more I think this could actually work. Good
on ya!
I'll read it again, and if I come up with anything else I'll give you a
shout.
Adam
Doug Culnane Replied on 07.09.2004:
Dear Adam,
Thanks for your response it is very encouraging, and interesting.
I have been thinking more about this design and I think the diamond needs
to be a symmetrical section and run very neutral in angle of attack. I
could have a pin pivot that stops the board riding up but allows it to be
raked forward. This would allow the foil to be feathered in non-foiling
winds and the boat would behave like a conventional Moth with very large
foils. As the wind increases then a pull on a rope to rake the foil
forward will put an angle of attack of the diamond and it will generate
lift. Once airborne then surface piercing properties should keep it
stable in heave and the rudder should trail along to keep the boat level
like a conventional T-foil rudder. The rake control line could be
adjusted like a kicker for wind and course changes. This makes the
control of the boat easier because you only have to worry about the
tiller, mainsheet, where you sit and where the camera boat is.
I do not know how it will handle heeled to windward or with ventilation as
these are very complex with may factors to consider. Maybe small angles
of attack on the diamond will keep enough of it in the water to grip its
way up windward, and reduce the pressure and ventilation problem. This
has to be tested but I really think there is a slight chance of getting
this working the day before Garda.
The multihull thing is a bit strange but as I understand it the wing
mounted surface piercing foils made the boat very stable and boring to
sail and that is why it was outlawed. I think my system will be suitably
tricky to sail, to stay legal. I do however agree that I think it would
be wise for the class to not rule out development at this stage. However
I also understand that we do not want to sail multihulls.
The whole structure thing is going to be a challenge and I think a couple
of extra layers everywhere would be a good idea at this stage. I hear
Garda is very deep so sinking is a bad idea.
I do not think that the angle of attack between the rudder and diamond is
critical. The rudder must just keep the transom level and trail along
like the other moths. On your system I can imagine that it is very
critical. I plan to make this T foil as drawn in the hope I can cut bits
off it. The draw foil is very large by conventional standards and we
hopefully are going to fly a lot faster. So velocity squared means it is
huge and the saw is going to come out. However it is easier to cut off
than stick on.
Thanks again for your feedback. It is great when someone else thinks this
will work because I am in danger of starting to believe it now myself.
I do not think this is competition for boats fitted with your system at
this stage but it could be good enought for conventioal Moths to be
convered to hydrofoil boats and sail with the hydrofoil fleet. Maybe
someone will test it for me on their boat?
All the best,
Doug
Olav Arne Nehls wrote on 06.09.2004
Dear Doug,
Regarding your diamond foil concept: Does it look similar to Roger Angell's
foils at the 2003 Worlds in France (see attached sketch)? Unfortunately it
didn't work at least in the waves we had there but it may be great with an
additional height control system.
Regards, Olav
Doug Replied:
Dear Olav,
I was not aware that Rodger did this because I have not been active in the
class for a while (8 Years)...
What was the reason why it did not work?
All the best,
Doug
Olav Replied:
In the mail you sent me last night you asked why Roger Angell's foils didn't
work. Let me first explain how they looked:
His hull is based on a Skippy Mk. I - same underwater sections but much less
freeboard and no flares (I have included the 4 photos of his boat I took at
the Worlds last year to this e-mail). It has a really large rudder blade
with a T-foil (elliptical plan form, low aspect ratio) on a removable
gantry. The diamond-shaped foils were fitted quite near to the hull bottom
(Roger removed them after the first heat) as shown on the sketch I sent you
yesterday.
AFAIK the biggest problems were ventilation and lack of longitudinal
stability. Probably some ventilation fences could fix this (but I have no
experience how effective such devices are) and a longer distance between
rudder and centreboard would be beneficial. I also think the hydrofoils were
too small (if I remember correctly the diamond had a width of maybe
600-700mm max.). After Roger had removed his foils he only competed in one
more race in VERY (!!!) light conditions but even then the swell was too
much for the low hull. I also have no idea what aerofoil sections he used,
they probably had a too big Cl even at low speeds so the boat would have
come out of the water too far...
All the best,
Olav
Doug,
Doug Replied something along the lines of:
Thanks for info what about your foil system?
Olav Replied on 07.09.2004:
my foil system of course isn't top secret :-) , I didn't even invent it
though. As long as I'm not an expert in fluid dynamics and stuff (I have
some little knowledge from various textbooks) it'll be some guesswork and
experimentation. What I want to build and try out first is the following,
based on the design by Rich Miller (www.foils.org/miller.htm):
- Canard: My boat has some kind of a 2nd daggercase between the mast and
stem. A canard (450*150mm, NACA 0009) on a strut will be fitted into this
slot so it runs on the water surface like a water ski. The strut is going to
have a free length of around 300mm below the hull which will be the design
ride height of the flying boat. After trying this out (I want to start as
simple as possible to get some experience - my goal is to have the minimum
number of movable parts in the system) I'm sure I'll build a wand-controlled
system to operate the canard as Ian Ward did.
- Centreboard: Raked back (to increase the distance between the main lifting
foil and the canard), 900mm long below the hull, 150mm chord, NACA 0012. The
top of the board is 400*225mm/NACA 0012 so it fits into the centrecase.
- Main hydrofoil: Sits at the tip of the centreboard, size is 1500*150mm and
it features a NACA 4412 aerofoil section.
- Rudder: Standard T-foil blade as used in displacement mode, probably with
an adjustable T-foil or a trim tab. In foiling mode it'll be attached to a
rigid carbon fibre outrigger (similar to the ones John Ilett manufactures,
also see my renderings) to increase course stability.
As I mentioned I'm sure it won't be the final arrangement but this is what I
want to start from.
All the best, Olav
P.S.: Did you already read the foiler design thread on www.boatdesign.net?
Very interesting and lots of useful information!
P.P.S.: I use the software "designFOIL" to analyze different foil sections.
It includes a virtual wind tunnel, you can add flaps to the section and see
what happens.
You can download a trial version from www.designfoil.com The only thing is
that you can only save 5 times if you want to design your own sections but
it can generate the most common NACA 4- and 5-digit sections. I use to
export them to SolidWorks but if you have Rhino it's good as well - and
exporting them isn't regarded as saving.
PHIL STEVENSON wrote on 08.09.2004:
Doug,
Saw your memo on pommy discussion site which lead me to your diamond foil
page.
Thought I might help with some of my experience.
Last summer I tried a main foil with turned up tips, about 1200 total span
with the last 400 each side bent up at around 40 degrees. The section was
a hand shaped assymetrical foil, probably higher camber than Illets' NACA
section.
Down wind it had plenty of lift and I suffered many breakout crashes at
pretty good speed. But upwind it was an absolute dog, lucky to beat a
scow.
My theory is that the leeway angle at which the boat sails upwind, changes
the AOA of the sloping foils by such a large angle that one is much higher
than optimum and the other is much lower. I have done no calculations.
This might be OK maybe with symetrical section foils but was a disaster
with mine. So be wary and do some calculations with leway angles included.
I then cut off the tips and bonded them on with slight dihedral at span of
about 700. With these I got similar performance downwind and good upwind
speed without hull flying. Still plenty of downwind crashes though.
This season I have an Illet foil with wand. Only one sail so far and some
tuning required to get it flying at the right height.
I also have a fin raking system working. So I can change the main foil
AOA instead of adjusting a rudder foil flap.
Phil Stevenson
AUS9324
Sydney
Doug Replied:
Dear Phil,
Thanks very much for your input. I was originally planning asymmetrical
foils for the diamond but I think this will generate opposing horizontal
lifts that do nothing but increase drag. Therefore with my resent
discussions I am coming round to the idea of a symmetrical system that
rakes forward to generate lift. Therefore it is very interesting to hear
you confirm the idea of symmetrical foils.
I posted the mail to the pomy list but I will do something similar to the
German and Australian list soon because the discussion is very useful and
interesting, and I think there are a lot of sailors like me that want to
get flying easily and cheaply. I hope to contact Wardi because this
project is right up his street.
Do you have some pictures of your foils for my collection.
Thanks again,
Doug
Olav Arne Nehls wrote on 08.09.2004:
Hi Doug,
Your diamond foil concept sounds really interesting and I agree with your
basic calculations. Do you have a certain foil section in mind yet?
I'm still a bit in doubt with my NACA 4412. IMHO on a foiling sailboat it's
necessary to have an aerofoil section with a quite high Cl for low take-off
speeds, a good Cl/Cd ratio, forgiving stall characteristics, and ? very
important! - a ?stable? Cl that doesn't increase too violently at even
little changes of AOA so the boat doesn't jump out of the water just because
you may have moved some millimetres too far back. Does such a section exist
at all???
Another factor to consider according to Ian Ward's experience is the
(negative) pitching moment an asymmetrical section produces. I guess the
main job of the rudder T-foil then is to prevent the boat tripping over its
nose, i.e. producing slightly negative lift so the main foil probably has to
carry the whole load instead of just 75%. Am I wrong?
Looking forward to new thoughts!
All the best, Olav
Doug Replied:
I will spend some U-Bahn time thinking about the foil construction thing.
CNC is too expensive if you do not have free access to the gear. Female
molds are to much work for one off builds. The hot wire method is very
good because you can use the cut out scrap to clamp down the laminate
while the resin dries. This makes a hight quality lamination as well as
fast accurate shaping. A hotter hot wire may be worth trying....
I think my design is not developed enough to worry about sections. I
have ruled out asymmetric (see discussion) and so that leaves the classic
NACA rudder sections in my eyes.
Perhaps others have ideas they can contribute to the discussion
I think that where you sit in the Diamond design determines the lift
distribution. The system should be very pitch stable (if it works). The
only danger is that the diamond gets negative lift so it has to be raked
forward when flying and not be in danger of swinging back or the boat with
trip and stop and at 25 knots that could hurt. The hydro dynamic pitching
moments of the foils I would say are insignificant compared to the pitching
moment the sail has.
All the best,
Doug
Mike Ewart wrote on 9.11.2004:
Read with great interest your design brief and the comments, on the point
of upwind work surely the use of symmetrical foils will give the effect of
a centre board as they are at 45 degrees the same effective area in the
vertical and the horizontal plane, and the purpose of symmetrical foils
as per tee foil on the rudder is to resist change, thus they are now going
to give the effect of a c/b and a lift foil?
Doug Replied:
Dear Mike,
Thank you for your message. I have been thinking a lot about how to
analyze the foil system. It is easy to calculate the lift and drag on
foils but at 45 degrees I am not so sure. My model uses is a mathematical
box around the diamond. These projected areas are the sides of the box.
Then you can calculate the forces in the planes we are interested in. I
think this model is accurate enough but am can not prove it, only discuss
it. There may well be studies out there that use the same approach but I
have not searched.
This system design I think is good enough to work and deserves to be tried,
because if it does work then you are right the foils give the same effect
of a centerboard and rudder and also lift the boat out the water. It is
easy to fit the system to a conventional boat and has no complex wand
control system, therefore it fits my brief.
Others seam to have tried something similar but I think their foils were
too small. Phil also make what I think is a mistake and one that I
initially made and that is to make the foils sections asymmetrical. This
turns in the sides of the mathematical box so that the sides generate
opposing lifts and drag. I also think that if the diamond pivots and can
be adjusted then really could work around the course.
I am afraid I have fallen in to the trap of starting to take this
seriously, and really believe its going to work!
All the best,
Doug
Mike Ewart Replied:
Dear Doug
agree with you there is some good stuff about foils and effective area of
inclined foils in "High Speed Sailing" and they make no mention of what
plane they are referring too, I think it might work as well and am very
tempted, I have been playing with some ideas based around a conventional
hull shape with angled foils that retract into a recess in the hull, and
looking at a system with a scow type hull with curved centre boards but
yours is cheaper and simpler.
regards Mike Ewart
Doug Replied:
Dear Mike,
A system that retracts into the hull may well be a lot better that the
Diamond system, but it will be complicated and expensive to fit, and take
time to get it to work. Good luck and please send me detail and pictures
of any system you try weather it works or not, because I think there are
a lot of Want to Flyers out there like me who are very interested.
All the best,
Doug
Olav Arne Nehls wrote on 22.09.2004:
I recently found very interesting instructions on how to make a power device
for cutting styrofoam with a hot wire:
http://www.nsrca.org/technical/tip_tricks/foam_cutter/foam_cutting_power_supply.htm
May be of interest for you?
Olav
Doug Replied on 1.10.2004:
Thanks for the link it is very interesting. There is definitely something
to learn about foil building from the model makers....
I think though that it is too complex for me at this stage. I think I will
get some high density foam and shape it with woodworking tools.
Doug
Simon Propper posted to the UK List on 1.10.2004:
For all you DIY foil makers
I found this site in the US where you can order foam blanks cut to your own
profile. May be of use?
http://www.compufoamcore.com/
Good luck
Simon
Doug Replyed to list:
Thanks for the link. I think that shaping foam with wood-working tools is
very old fashioned and that this kind of service is very interesting. I
do however feel that my 2" plane is going to get used waxed up because I
am an old fashioned guy. Sooner or later this old dog will have to learn
some new tricks.
Has anyone else built foils without using a 2" plane?
Doug Culnane
Chris Miller wrote on 08.10.2004:
hi,
i've developed a simple mathematical mode of your diamond design. All you
have to do is choose a takeoff speed and fly height and max speed (whatever
that is!). It produces a tapered twisted blade. Its only hand written at
the moment so i cant send it to you, but I'll type it up and forward you
a copy.
To summarise it, twisting the foils has the same affect as taper and
immersion depth, so lift is a function of fly height (well of immersion
depth) by way of a cubic,
ie L = ax3 + bx2 + cx
where x is the foil immersion depth and a, b and c are constants defined
by two parameters, the taper and twist ratios and the angle of attack and
chord of the tip.
I think this is a very desirable characteristic for the system.
chris
Doug Replied:
Dear Chris,
Very Cool idea Chris but:
What happens when the winds are light and the Diamond is fully immersed?
You have a twisted foil that you can not feather to run at zero lift.
This means big big drag. (Maybe?)
However twisting the foil is a good idea to help with the "lift is a
function of fly height (well of immersion depth) by way of a cubic"
thing.
I originally I thought in terms of asymmetrical foils and having a larger
angle of attach on the upper foil but I went away from the idea, because
I think it is cooler to be able to feather the foils in light winds. If
you can build a case for the Diamond that allows it to be raked forwards
when the wind picks up out on the water you can say OK let see if she will
fly and rake the board forward to get lots of lift and out of the water.
As the wind increases she may be riding too high and the pressure on the
Diamond may mean that it is ventilating all the time. You can then reduce
the angle of attach to keep more of the diamond in the water and have more
control. (Maybe?)
I do not know if I am right but I think a straight foil is worth a try
first and it is a lot easier to build. You may well be right and small
amounts of twist may be useful to refine the design later, because I
totally agree that "I think this is a very desirable characteristic for
the system."
All the best and thanks a lot for your input,
Doug
Chris Replied,
hey,
I wasn't really designing the system for non-foiling, but you are right to
consider it. i also considered having a speed sensor or wand to alter the
diamond angle (all mechanical). However it may be easier to do it manually.
The twisted foil produces a much drag as a larger foil (twist equivalent
to taper - i think!). Just out of interest what would be the minimum speed
for a moth? i.e. how fast does it go in say a force 1 or 2?
another think you could do with twist and taper would be to design the
system so it self damped, but i don't know how to do this yet - i think
that's well hard core. lets get it flying first!
chris
Doug Replied:
I did not start this design with the non foiling in mind either but it
occurred to me that it could be considered, and not written off with some
stupid comment about "Who wants to sail in light winds anyway" (quote Doug
Culnane).
I did not think of a wand sensor controlling the diamond angle that is
VERY interesting and something to think about.....
Doug
Chris Miller wrote:
hey
see below, i've added comments to your points
On 9 Oct 2004, at 13:33, Doug Culnane wrote:
>> I think you could be right Chris but it is a long time since I did my
>> 2 dimensional foil theory. I think that there is a CD (surface drag)
>> part and induced (related to lift) drag part, and you have to add the
>> two together. This is going back 10 years... Maybe Adam can remember
>> he studied airplanes 8 years ago and has drunk a lot less beer so his
>> brain may work better. If he can not remember I could dig my books
>> out but I would have to remember where I put them...
Yep your right, there is a surface drag component, but i don't know how
to model it. i never did that at uni! may need to read up on it. the
induced drag component comes from the hight pressure fluid on the lower
surface of the foil wanting to go round the end of the foil to the low
pressure high side. the creates a vortex of the foil tips. However the
diamond foil does not have ends, so the only extra drag will be from
the surface piecing.
>>
>> It did occur to me that a little lift in light winds could be
>> beneficial but I thought that I should design a system that did not
>> have negative lift and test to see what the best position for the foil
>> rake was. I expect this to vary in different wind strengths.
>> Therefore the idea of being able to have no lift or lots of lift by
>> the pull of a string makes the design very flexible (and therefore
>> more likely to work). No lift is also good when the rudder breaks and
>> and you do not want to Type D all the way home.
Yep, an adjustable foil angle i think will be very important for fine
tuning the system, and maybe as another control. You have to remember
that you get about 5 degrees adjustment by varying the angle of the
boat. i''m not quite sure how the diamond foil interacts with the T
foil rudder, does the rudder contribute any lift, or is it set a zero
so it simply stabilises?
>>
>> I am sure that this is complex and when the real world problems like
>> "remembering to sheet in to force the bow down when the boat get too
>> hi...?!! will not make it more simple to understand. My theory and
>> mathematical modeling is crude and we could study this in a more
>> mature way (if someone measured accurate speed data of existing
>> systems) but this is very complex and a bit too hard. I think it is
>> easier to build cheap foils and test to see what works best, however
>> this discussion is very nice and fun because it help me understand all
>> the details better.
>>
>> Your idea of a sensor and actuator is very interesting and could make
>> the system much much more heave stable, (which is the biggest problem
>> with the other systems) I do not have the option of developing a wand
>> system because my system has to work out of the box. I may well try
>> this out next winter. I am very interested in the details of your
>> experiments.
Some sort of heave velocity sensor could be employed, for example a
small vane that aligns itself to the flow direction. When the flow is
going up or down the foil this vane could actuate a small control flap
or something like that. This could also be done on the fastacraft foils
that would make the craft much more heave stable. It would be in effect
adding differential control, such the D in PID control (proportion,
integral, differential).
However the foils currently do this already to a certain extent, due to
when the foils move up or down through the water you get an apparent
flow effect (such as you get apparent wind while sailing downwind). The
larger area the diamond design has will increase this affect.
Do we really want sensors and the like on the foils? its only adding
cost and complication to the design. It would be better to avoid active
systems if we can.
>>
>> I thought I would study the videos of the Australian surface piercing
>> Moth which seamed to work very well, until one foil ventilates and
>> that side drops. The sizes of it foils are in the same ball park as
>> the Diamond and so I think it is good evidence that a surface piercing
>> system could work if the headache of ventilation can be overcome. At
>> least the Diamond has more chance of dropping level when it does
>> ventilate.
>>
Each foil was 0.5m long, which gives your design twice as much surface
area. Also with twisted tapered foils huge amounts of lift should be
available in comparison. The biggest problem wind rush was waves.
Sailing downwind when one foil was on the crest and the other in a
trough caused the boat to be very unstable. The diamond design should
be much better due the foils being closer together (windrush's foils
were wing tip mounted).
>> All the best,
>>
>> Doug
>>
chris
Doug Posted to the UK Moth List:
Dear Moth sailors that may be interested in hydrofoil design calculations
and what I can not really remember,
I could not find my books but I looked at my Moth design paper which does
not display the formulas correctly but I think I am correct when saying
there are two components of drag when calculating wing performance.
Component of Drag from the section:
Profile drag is related to the section shape and how it performs at angles
of attack. (This is what people get over interested in but basically every
smooth foil is the same. Some smooth foils do behave slightly differently
to others.) This is very important if you are designing the next Boeing
747 that will have to carry some large foils around for a billion miles and
each mile costs expensive fuel. A 0.02% increase in performance vs. drag
will be worth spending $50,000 on research to get. However if are a low
rider and want to be a DIY high flyer then I think that any smooth plank
will do because the design problem is control and the fact that it must
work at 0.01 knots of boat speed and 30? knots. (speed squared means 0 to
(30? x 30? =) loads and loads.)
Component of Drag from lift:
Induced drag is related to lift and influenced by the plan form and aspect
ratio for the foil. End plates like T foils and water air interfaces
(Surface Pricing :-) ) extend the effective aspect ratio which helps.
Therefore this is complex and not worth getting to uptight about (when is
is more important to remember to sheet in to go down?!..)
I think that it is true to say that you do not get something for nothing.
You can not get lift without extra overall drag. So in a Moth you have to
carry your foils around in no wind and so they should do nothing. However
they are good when they do something and reduce the wetted area of the hull
or better still, get the thing out the water completely and also reduce
wave drag as well as wetted area drag.
I love the expression "Low Rider" it sounds cool and if the diamond foil
works I will call it the "Easy Rider". If it does not work I will call it
the "**** Rider". However anything is better than a "No Rider".
Doug Culnane
Low Rider GBR 4019
Tom Edom wrote on 21.10.2004:
Doug and other DIY foilers,
You may know about this but... at Boatdesign.net there is an
extensive thread on dinghy foiler design. Many but not all are moth
related with lots of input from Wardi, the Stevos, Andy P and Rohan.
There are also some very perceptive technical inputs from Tom Speer
and some others (see his website at www.tspeer.com) . There are
about 12 pages to the thread and wading through it is almost as good
as reading a book about dinghy foilers (if there was one). The URL is
http://www.boatdesign.net/forums/forumdisplay.php?f=12 and look for
Foiler Design. If you want to air your design you will get an
international peer review!
Cheers
Tom Edom GBR 4064
Doug posted to the UK List on 17.11.2004:
I recently spent a week in the UK on holiday from Austria and took the
opportunity to visit Adam May and take him up on the offer of a go in his
boat. This is a brain dump of my thoughts and experience, with respect to
trying to DIY fly. I welcome feedback and discussion. I would class my
self as a reasonable Moth sailor from the middle of the fleet. I have
not sailed a Moth or any other high performance boat for 7 years, so I am
a bit out of practice, but I think my first time experience will be
representative for most experienced Moth sailors.
Day One:
I had great luck that the wind in Weymouth was a steady 10 Knots on flat
water. This was enough to fly but in the lulls it was low riding
conditions. I got the odd gentle gust to give me a taste of how the boat
may behave in stronger winds. This is probably the optimum first fly wind.
Launching looked a very wet, cold and uncomfortable activity so it was good
that Adam could do this alone. After a quick sailing demonstration Adam
landed the windward wing on the pontoon and stepped out allowing me to step
in. This was very civilized because swimming in November is not my idea
of fun.
I quickly remembered what sailing a Moth was like and that it aint that
easy. The boat was slow upwind and lifting a bit, but felt like a draggy
low rider. I could not really fly it upwind in these marginal foiling
conditions but I think unfortunately this was due to bad technique. The
boat seamed very unstable and I put this down to the high angle of the
wings on Adams boat. It had to go a long way before a wing hit the water
and provided some roll damping.
I tried a bit of reaching and the boat flew nicely, but it was clear that
there was a lot going on. Maintaining flying hight is very complex. I
decided to set and forget the rudder trim tab because it was more trouble
than it was worth. The mechanism is a bit clunky and you have to remember
which way to turn it. The rudder and mainsheet have a large effect on the
pitch of the boat, and therefore the heave. I started to re-learn how to
use them to control pitch and heave with the forward drive of the sail.
This was something that was clearly going to take a few flying hours to
get right. The wand did not seam to be any help at all, and dragged
thought the water most of the time.
I had one nice little gust when broad reached and hiking off the wing bar.
After the initial fright from the acceleration. The boat climbed high and
would not go back down. I was waiting for the boat to do a ventilation
drop and concentrating to try and work out which type it would be (A, B ,C,
D, E....) I then realized that the wand was working and controlling the
ride hight. I was riding high up in the air and the wand was bouncing
along the surface. There were no waves and so it was easy. After a few
seconds I started to relax and enjoy the experience (and look for the
camera boat). My GPS top speed reading of 14.4 knots what probably at
this point. Adams 17.2 Knots reading in the same wind shows how boat
handling is the key to control and control is the key to speed.
I tried a few gibes on foils for fun and could only laugh at how weirded
it was. Again there was a lot to learn to get this right.
I managed to deliver the windward wing back to the pontoon and stepped out
so that Adam could step in and swim the boat into the beach. I had escaped
the first day with no capsizes and no swims. I had a lot of information to
process and had the feeling that sailing in a force 3 could be a great deal
of challenging fun and also that I was back on a very steep learning curve
which is my favorite place to be. The flap controls worked but had lots of
development potential. The overriding factor when competing with other
boats will be boat handling and that flying time is essential, fun and very
very fast.
Day Two:
The next day was windy. I estimate that there was a good force 4. After a
pint of lunch time bravery juice I was ready to have a go.
It was clear that we both needed to swim to get the boat launched. I made
the beginners mistake of going to the leeward wing (where it was shallower
and therefore a little warmer) to hold the boat while Adam boarded it.
Adam sheeted in and the leeward wing forced me under the water, and then
I was reminded that there are other foils under the water by a painful rap
on the angles from the main foils. Adam said that he was not trying to
drown me on purpose but I am not so sure. At this point I realized that
today my body, and ego was going to get a bashing.
Adam handed over by capsizing near the pontoon and I swam out to right the
boat. I sailed up wind gently and under control. I then boar off to see
if I could get back downwind. The answer was a clear NO FUCKING WAY.
I did not have the confidence (or stupidity) to sheet in and drive the boat
hard so I tried to nurse it downwind but there was no way this thing was
going to play nice. The boat would ride up on the foils and then it was
either going to to fall into a broach or capsize. The wings hit the water
before the hull and so it was very hard to recover from these crash
landings.
After a short wrestle I decided that a win would equate to getting the boat
and myself back to the beach in one piece. My fitness meant that I had a
limited amount to energy and time to get the boat in and a near miss with a
concrete jetty confirmed that there was no chance of a rest. I was very
relived to get the boat close enough to the pontoon to shout SWIM at Adam.
Adam then showed me how the professional do it. My jaw dropped when he
drove the boat into a gibe forced the boom across because the apparent
wind strength meant the gibe was technically a tack. It all look very
impressive until as he tried to get his balance on the new gibe and pressed
the ejector seat button by accident. He bounced 4 foot in the air out the
back of the boat over the transom. On the second attempt he fell across
the boat head first as it capsized at about 8 knots......
I am not saying that sailing these boats are impossible to sail in strong
winds, but it is not easy and it can only be done well with lots of
determined practice. There is a lot happening and you need to understand
a lot of new dynamic stability factors and how they interact, because this
is a very exciting new dimension to sailing. If you remember the
excitement and challenge of sailing your new narrow low rider (with no
T-foil rudder) in a force 5 for the first time, then double it and you got
a foiler in a force 4.
Random Conclusions:
- The idiots that talk about having a top speed to brag about should shut
up because it is scary out there and the trick is slowing the thing down
as the wind increases.
- You got to be fit and on the ball to make a reasonable job of flying.
The action never stops. There is always something going on and there is
no physical or mental rest from the time you take the sail out the bag
until you get it rolled up again.
- If you can not get the boat off the beach and are having trouble launching
then you probably should not be out a sea.
- Simon Payne says that the boat is alway talking to you. This is total
rubbish. The thing is screaming it head of, you have to learn to manage
a state of information overload.
- Sailing Wizkids beware: Unless you can get round the cans in a force 5
in a low rider, you can not jump out of your 4*0, B*, RS* or R2D2 and
expect to fly a Moth. Moth sailing is hard. Flying Moths is Fucking
hard.
- When you get your new shiny foiler be careful who takes it for a joy
ride, because these thing are not Laser dinghies..
- The KA McSail is very like a wind surfer sail. It has an On - Off type
of trim. It is either generating loads of low drag power or a stalled
out rag of crap. There is a learning curve to get the most out of the
modern sails and they are not forgiving.
- The Moth class has a challenge to get new sailors good enough and
determined enough to sail these boats. Being the hardest boat to sail
is good and will alway attract the best sailors, but retaining the best
sailors attention is hard. No Flying Moth sailor will want to sail a
Laser but not many Laser sailors will want to go thought the ego bash of
a Moth. Narrow Moths started this effect and I see that the hydrofoils
will exaggerate it. I think that the class has to be careful that the
middle and lower third of the fleet are not left behind. But maybe this
is crap because I am a middle of the fleet sailor that has been
encouraged back to the fleet by these developments.
- Lintons female molded foils were very impressive and well made but I was
not worried too much about the section and build quality of the foils while
I was trying to get back to safety in a force 4. I think we are still in a
pioneering period where concept, control system and rider skill is more
important that build quality.
- I used to be able to sail my low rider around the cans in 30 Knots of
brease. I would like to see the video of a top fliers getting to the
leeward mark in that wind.
- Talking to Adam about Lesson videos the camera boat can destroy your boat
if they get too close so you need a big bay an no one chasing you if you
are flying. These boats stop very fast and unpredictably so you have to
make sure you have got a landing slot and you need to protect it. (When
you find out were the camera boat is tell him to piss off).
Thanks:
- Big thanks to Adam for trusting me with his boat, and for swimming to my
rescue.
- Thanks to Linton for showing me round his workshop and providing boat
launching facilities.
- Thanks to Alison and Colin for the hospitalityInt-Moth_UK@yahoogroups.com
and traditional English Chinese.
What effect does this have on the Diamond foil project?
Life is too short not to be involved in this exciting game and I want to
Fly more than ever. The Fast Foil / Full Force (4F) system is very well
developed and the thing basically works very well, but it is not easy to
sail well. The top sailors will be refining these systems and working on
boat handling. I think that you can not compete with these guys unless
you spend a great deal of time flying.
I plan to turn up and fly around lake Garda at the Europeans with an
untested home build system and no practice. Since Garda is a traditionally
windy location this is a rather stupid plan, but a good opportunity to test
a new concept and have a laugh. Therefore I still plan to build the
diamond design and take it to Garda.
One feature of the diamond design is that it can be potentially turned off
by feathering the foils. This could be its most important feature when I
have to make the decision weather to use it for the event after the first
few test sails.
The latest plan is that Adam will make the center board box arrangement
that fits to the boat and post it to me. I will glue a diamond to it and
make a rudder. The foils will be shaped out of pine and covered in loads
of UD carbon. My next task is to go to Ikea and buy a few wooden shelfs
and shape them into foils.
All the best,
Doug
Hey,
Chris posted to the UK List on 11.12.2004:
I've put some stuff about a simulation I've done on the diamond foil.
http://www.intmoth.f2s.com/theory/diamond.html
chris
Doug Replied:
Very interesting Chris.
Did you model a FastCraft type system as well. I think that it would be
interesting to compare the two systems.
I also think that it would be interesting to run the simulations with
different foil configurations to find out what the effect of a large main
foil is or what happens as the rudder T foil gets smaller. This is all
very theoretical but I think it may be good enough to help us understand
the control effects of the many different factors. I do not pretend to
understand control system as well as you but I would have thought that
this modeling should be targeted to be able to make control conclusions
like. Big main foils are easier to sail but slower for example.
Doug
Lyndon Beasley wrote on 21.01.2005:
I am following your foiler development with interest, would like to
have a dabble at making some if I ever get the time. How big would I
need to get a Magnum7 airborne?
Doug Replied:
I have no idea how big the foils should be. But a clearer answer would
be "I would say that the mag 7 is 10 to 20 kg heavier (~15% more total
weight) so make the foils 15 % bigger." However I have no idea if the
dimensions of the original design are good.
I have cut out my diamond plan form blank. It is a diagonal cut through
an Ikea Traggen? ( pine shelf cost 6.99 EUR :-) ).
My carefully calculated dimensions are:
30cm cord at the top of the diamond.
~9cm cord at the bottom and the diamond.
The diamond is now 4 x 60cm in length.
This is bigger than planed but it allows me some extra length for
mistakes...
I now need to make some section templates. I think I will ask Chris
Miller if he has some symmetrical surface piercing hydrofoil section
data or CAD files (please Chris) to save me some work... Once the two
sides are shaped I have to get some carbon on them fast before the pine
warps too much...
I will post some pics of the Ikea catalog on the site soon for
reference......
Chris Miller Replied:
Hey, I'm about to start building some diamond foils too! The section you
should use is an H105 section. It is a modern laminar flow section that also
reduces pressure peaks over the foil. This is good for surface piercing
foils due to cavitation being reduced. Refer to my papers section of my site
for downloads of the paper detailing its section etc..
http://www.intmoth.f2s.com/forum/viewtopic.php?t=20
Its the first link on the page.
chris
Doug Replied:
I had a look at the section and it is exactly the kind of thing I want:
"It is a modern laminar flow section that also reduces pressure peaks over
the foil. This is good for surface piercing foils due to ventilation being
reduced."
However it is not symmetrical and I need a better quality drawing of it or
some offset data to make a drawing. Do you know if this exists?
What are the dimensions of your Ikea shelf or have you got some proper
materials? Send me pics if you have them.
Doug Posted to the UK List on 14.04.2005
The project is under going a reality check at the moment. If it passes
this test I hope to produce a prototype but I am not sure if it will
work. I found a better source of materials than Ikea and found CAD
drawings of NACA sections in my /home/doug/StuffDoneAndForgotten
directory. I am ready to start building but before I spend cash on
plastic... The reality check question is am I stupid enough to build
something that may not work and costs x when I can buy something that
does and costs y. I hope the answer is Yes, but the cost mathematics of
materials against lintons price list are more accurate than my foil
theory calcs.
</pre>
<div align="right">
<a href="http://www.culnane.net/" target="_blank">Doug Culnane</a></div>
Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-84076322070493127912014-03-16T13:33:00.000+01:002014-03-16T13:33:06.564+01:00Dehumidifier 3.0<div class="separator" style="clear: both; text-align: left;">
One on my obsessions is keeping the bat cave dry (or not moldy wet). Drying out an 140 year of Vienna Cellar seams impossible but managing humidity in it without using Gigawatts of energy is an interesting challenge.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
This is the latest version of my dehumidifying attempts. I am sucking air in from out side through heat exchanging tubes into the dehumidifier. On the warm humid days of spring and summer the hot air will cool and dump water on the inside of the tubes which drains down into the water tank. This means I suck in fresh dry air but I can use passive and active measures to dehumidify. If the air outside is dry then the dehumidifier blows in dry air after removing a bit of the water from it making it even dryer.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I do not know if it will work but it looks like a monster so I thought I would post a picture of it. </div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj95LXmxx1GgGJL0W24ie3GTBu-3OLZufVncV-Rnn_UiQ0Xz-CGXnzHG0A3Mmf8GRd5e5YiJt2pm9pfb81rITZQwNKrbg6pWzdHjoZn39Q2VzXbskB8QoWnkiNsG1x_DSwfa6cfKoEdRxqr/s1600/2014-03-16+13.05.01.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj95LXmxx1GgGJL0W24ie3GTBu-3OLZufVncV-Rnn_UiQ0Xz-CGXnzHG0A3Mmf8GRd5e5YiJt2pm9pfb81rITZQwNKrbg6pWzdHjoZn39Q2VzXbskB8QoWnkiNsG1x_DSwfa6cfKoEdRxqr/s1600/2014-03-16+13.05.01.jpg" height="640" width="362" /></a></div>
<br />
I think I have identified the main source of water being air from outside so this controls that water source. The problem with bloking air from outside totally is that the air in the cellar is very stale and some of the time the air from outside has a drying effect. There are so many variables that effect humidity it is literally as complicated as the weather, so i do not know if I have got this right yet or just wasting my time.<br />
<br />
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-48978421012598931672013-12-10T22:22:00.002+01:002013-12-10T22:22:46.500+01:00Slow Progress<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEifXrLEE_LuqbDo0j6AMWIxntep-s5FCziA4e1q96aNVpCCJgV4EtIKS0vaS1rBxx1zJej7RXXcEgEXke-K47NI2Rx1V1Ga_-wm27TDH9UBEFDncd28aec2VqZUgZDKAFCthyphenhyphen-aUdwcV8Bn/s1600/2013-12-10+21.42.07.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="226" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEifXrLEE_LuqbDo0j6AMWIxntep-s5FCziA4e1q96aNVpCCJgV4EtIKS0vaS1rBxx1zJej7RXXcEgEXke-K47NI2Rx1V1Ga_-wm27TDH9UBEFDncd28aec2VqZUgZDKAFCthyphenhyphen-aUdwcV8Bn/s400/2013-12-10+21.42.07.jpg" width="400" /></a></div>
<br />
The Bat Mobile progresses but very slowly.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-18545648971802566592013-02-11T08:21:00.000+01:002013-02-11T08:21:11.563+01:00Batmobile Bits.I cut the Batmobile in half:<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiy18mnPPhen2L2gr3gtqQ3mlDaKB6X-y3HROPN6eapdhDvm69p7NRgfkoYcQ-9PLV6ZzgS_H7tj2IBSNBrHns9TFgj1bapV4czmoLHmo-KYtBdY0drIuYJ0SJXSeIcCpVciEf4g2MCv852/s1600/Bat1.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="266" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiy18mnPPhen2L2gr3gtqQ3mlDaKB6X-y3HROPN6eapdhDvm69p7NRgfkoYcQ-9PLV6ZzgS_H7tj2IBSNBrHns9TFgj1bapV4czmoLHmo-KYtBdY0drIuYJ0SJXSeIcCpVciEf4g2MCv852/s400/Bat1.JPG" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiGug0kunbh5XOb_0J2vEXIf8oLrjbPEtPxuONfE6Df_vjfLrag5LrdeP05KVk88hyyRGgEcx-nDBTw0ONmhsxGD_4hReVBAKWJcydsc6WOqrIHAoWssmmgRRTNFivw2pN4LyUfXGmGRHlZ/s1600/Bat2.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="266" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiGug0kunbh5XOb_0J2vEXIf8oLrjbPEtPxuONfE6Df_vjfLrag5LrdeP05KVk88hyyRGgEcx-nDBTw0ONmhsxGD_4hReVBAKWJcydsc6WOqrIHAoWssmmgRRTNFivw2pN4LyUfXGmGRHlZ/s400/Bat2.JPG" width="400" /></a></div>
I was afraid to take out the bulkheads in case it lost its shape so I laminated in sections.<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjWBHswXbNz7yKNvPDzIvdyXVk9ygwaQ2bXF9KALSqW6aAKT4tlw6bgt9dNcoLPygsTqWlcvNBB_TdIuzruaHU7FlOvqARu9WMGVHqTf3a8u49fL6eUD7sqxxlUoOsq_5JiLMlIxo50UbK2/s1600/Bat3.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="266" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjWBHswXbNz7yKNvPDzIvdyXVk9ygwaQ2bXF9KALSqW6aAKT4tlw6bgt9dNcoLPygsTqWlcvNBB_TdIuzruaHU7FlOvqARu9WMGVHqTf3a8u49fL6eUD7sqxxlUoOsq_5JiLMlIxo50UbK2/s400/Bat3.JPG" width="400" /></a></div>
The last bit of resin completed the inside skin on Sunday.<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjZL1RjXUHZmHl15M1xBze2AAmSAta11Zkl3zifMyA2lKsmrCt7U8awSrlrbRuNckMEVPpQxfCiK7hj1KL4Kc2P7J9ToHIx1hUFhfFG3B0k4Kr5DrUOCQxCK8zU0k-78LExUQtZYnA92i1U/s1600/Bat4.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="265" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjZL1RjXUHZmHl15M1xBze2AAmSAta11Zkl3zifMyA2lKsmrCt7U8awSrlrbRuNckMEVPpQxfCiK7hj1KL4Kc2P7J9ToHIx1hUFhfFG3B0k4Kr5DrUOCQxCK8zU0k-78LExUQtZYnA92i1U/s400/Bat4.JPG" width="400" /> </a></div>
<div class="separator" style="clear: both; text-align: left;">
I am very impressed by my guestimates there was no room for error (or making it 4cm smaller). I have had to sink the trike frame into the shell so my feet can turn the pedals, but I still need a knee solution, as they do not really fit. I will also have to modify the steering bars a bit so that I can turn corners but I knew this would be a problem.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-1994695076556438262013-01-19T16:36:00.005+01:002013-01-19T16:36:59.557+01:00Unpeeled<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgFv9cuSET2KMR7XriNorq3vutepmc62n7QMg2PFPN6AzaXYYrbgKd2Qn3Y01EmoJILmg7mInQUTwBO85MOyUsUmnfBvXpHngJ-j_QmvfJmxzOjxnl2gcPG5zU-KBjgY_OTrZJvmwrLgzfe/s1600/unpealed.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="298" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgFv9cuSET2KMR7XriNorq3vutepmc62n7QMg2PFPN6AzaXYYrbgKd2Qn3Y01EmoJILmg7mInQUTwBO85MOyUsUmnfBvXpHngJ-j_QmvfJmxzOjxnl2gcPG5zU-KBjgY_OTrZJvmwrLgzfe/s400/unpealed.jpg" width="400" /></a></div>
Unpeeled the Batmobile looks like something Batman would have in his Batcave.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-19590160021400075442013-01-13T21:31:00.002+01:002013-01-13T21:31:45.066+01:00Good weekend in the BatcaveYesterday I finished shaping up the topside of the Batmobile.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg_I2FmYuAn3gdkIuUe8d1EAZZv2HfZj8hlsMZ9YZnXyd_3nZwgLPR7O-sHw3bkZfNonJrWZ1dDbfwFQfmDmJPrEped2weeVBCf99jzL_udDquKjbU1OE6RM7Lf8SwvZwV2xjaGr4gV4Zgf/s1600/Shaped.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg_I2FmYuAn3gdkIuUe8d1EAZZv2HfZj8hlsMZ9YZnXyd_3nZwgLPR7O-sHw3bkZfNonJrWZ1dDbfwFQfmDmJPrEped2weeVBCf99jzL_udDquKjbU1OE6RM7Lf8SwvZwV2xjaGr4gV4Zgf/s400/Shaped.jpg" width="400" /></a></div>
<br />
Batman and Boy Wonder then put on a layer of Bat Carbon, and sucked it down the the Bat pump.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiWVMXsBW8TTRyrF4mY-z9DXBpmGH_57QLeLRarQvZ-uvSQq-x7F9-6pet_sd3zqVkga0XJEnkmvQn5nlxg1xG5TBTCw7gt_7b6M52ndUSDl37LKlGxxXwpe-StFxl8VOpqfpZWqQhA05R2/s1600/InThebag.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiWVMXsBW8TTRyrF4mY-z9DXBpmGH_57QLeLRarQvZ-uvSQq-x7F9-6pet_sd3zqVkga0XJEnkmvQn5nlxg1xG5TBTCw7gt_7b6M52ndUSDl37LKlGxxXwpe-StFxl8VOpqfpZWqQhA05R2/s400/InThebag.jpg" width="400" /></a></div>
<br />
I am looking forward to unwrapping this tomorrow evening.<br />
<br />
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-28601630772481646832013-01-06T15:48:00.002+01:002013-01-06T15:49:48.149+01:00Batmobile and time machine.It has been a longtime since I blogged in Doug Culnane's ego dot com but I have been busy blogging at my <a href="http://crowize-vienna.blogspot.co.at/">Crowize</a> Blog. I have also been busy in the Batcave but mostly renovating the Batcave. However this weekend the Batmobile took a great leap closer to being finished. The mold was very slowly taking shape. The foam pannels are 2cm think house insulation foam that has great properties: cheap, light, stiff and easy to work with. The mold turned into a bit of a flat panel design.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgIPTr8ey0wSL1PkaLeCA2i-2tvQNmYfwQjBz4NbMocydlUxXTsBPnCc7-CuAe90D7mYKEr7qbhbZj1PrEU-sNKI_rMMaapbacvgwEYNEMPvgyYay164d5vyuCjH4h2lNxQFGFjQ2XWlRBe/s1600/Batmobile.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgIPTr8ey0wSL1PkaLeCA2i-2tvQNmYfwQjBz4NbMocydlUxXTsBPnCc7-CuAe90D7mYKEr7qbhbZj1PrEU-sNKI_rMMaapbacvgwEYNEMPvgyYay164d5vyuCjH4h2lNxQFGFjQ2XWlRBe/s400/Batmobile.jpg" width="400" /></a></div>
<br />
It occurred to me that it is silly to make a mold and then a foam sandwich shell from it, why do I not carbon over the mold cut it in half down the middle and smash the bullheads out of it and carbon the inside skin. The only issue is the planned foam is 5mm think so the inside skin is 20 mm each side smaller and the outside skin is 5mm smaller. It is designed to be a tight fit over the trike so I may need to be a bit creative to get the trike to fit in it but small is good for aerodynamics and it will be so much less work and materials to use the mold as the shell. The extra weight of 15mm thicker foam is not worth worrying about for this experiment.<br />
<br />
So this means I have just saved at least 6 months of weekends this weekend, which I am very happy about, because it gives me more time to continue the unending task of Batcave renovation...<br />
<br />
<br />
<br />
<br />
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-43468818288907775132012-10-01T21:12:00.001+01:002012-10-01T21:13:35.842+01:00Enjoyment at other peoples expense.I have not Blogged about the Moth Worlds because my ego got a big kicking. However thanks to <span class="gD" name="Gerhard Pirker">Gerhard here is a picture of me leading the race into the cliffs.</span><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh8iEqAz09WQP3VcAUFJgeA9EIJ9401o7V9zzCsVYcFkZlmak4W1tN6R-E-VqN33Q_ATHHYA8vsLCcuq8a2YqRzbR9F8GlYDhOGoWTdrCVuuLlPqJObPl3a99dZummr5AScsgkh75gQwQqg/s1600/DSC08547_enjoy!.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="266" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh8iEqAz09WQP3VcAUFJgeA9EIJ9401o7V9zzCsVYcFkZlmak4W1tN6R-E-VqN33Q_ATHHYA8vsLCcuq8a2YqRzbR9F8GlYDhOGoWTdrCVuuLlPqJObPl3a99dZummr5AScsgkh75gQwQqg/s400/DSC08547_enjoy!.JPG" width="400" /></a></div>
<br />
Shortly afterward I was very last. I realized it is time to spend more than 3 days a year sailing and over 20,000 Euros. Moth sailing is loosing its charm for me as I see that that it is no longer a competition with myself anymore and more a money and time drain. However I hope some effort to race locally next year will give me some return on my small investments.<br />
<br />
Another lesson from the Worlds is the starts where horrible and nasty bad. I was surprised no one got hurt or did some expensive damage. Wait a minute they did a few times.... split second decisions that cost thousands of euros killed the fun a bit for me too...<br />
<br />
Anyway the sailing and location was great and it is good to catch up with some old friends and make some new ones. Not sure if I can catch then on the race course though.<br />
<br />
It was great to watch others hurt themselves and do thousands of euros of damage. Here (again from Gerald) is a little pre start smash... Enjoy.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi1jAfGLoqGDrhHtTzcxjdT4XroiaTNxsPvcbVNzGIDjNprke5Bi5BQMlfyBizzuiYh3xLiZ2M9PIrhTm9Ag9hz-Ofs63CiXIJ-1mkOUxuvv7Fni4arQS80AR9DRBBVXJQaoCuUXg2f8g4D/s1600/JoeAmac1.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="357" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi1jAfGLoqGDrhHtTzcxjdT4XroiaTNxsPvcbVNzGIDjNprke5Bi5BQMlfyBizzuiYh3xLiZ2M9PIrhTm9Ag9hz-Ofs63CiXIJ-1mkOUxuvv7Fni4arQS80AR9DRBBVXJQaoCuUXg2f8g4D/s400/JoeAmac1.JPG" width="400" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhI-IYfl5XAb1h06h6OKgNxoVSv6yJYaaJ3mpL5ZX0nkeVEb5OwT6kS3mCe9uq6UwClL-Ud63y52UfzUyLzpg5hU0pgKdTNRIXqCTiKccAR1DbOa0LhKWpxti5AX236h5fnl-r9mYJUzeF9/s1600/JoeAmac2.jpg.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="256" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhI-IYfl5XAb1h06h6OKgNxoVSv6yJYaaJ3mpL5ZX0nkeVEb5OwT6kS3mCe9uq6UwClL-Ud63y52UfzUyLzpg5hU0pgKdTNRIXqCTiKccAR1DbOa0LhKWpxti5AX236h5fnl-r9mYJUzeF9/s400/JoeAmac2.jpg.JPG" width="400" /></a></div>
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com1tag:blogger.com,1999:blog-2860987473436010329.post-35914449750779687442012-08-08T20:48:00.001+01:002012-08-08T20:51:53.064+01:00International SportingAs a Brit you can not help being motivated by the success that GB are having at the Olympics. So here is a rundown of my personal international sporting preparation...
<br />
<br />
Alfred has been busy in the Bat Cave and Lord Flashheart is nearly repaired. A big thanks to 2 people that contacted me with tips on where to get carbon tubes at short notice. This kind of camaraderie demonstrates to me how cool the the Moth fleet is. Aardvark delivered a new mast boom and replacement tubes so I am sorted (nearly). A new Hyde sail arrived too so if everything fits together I will be blisteringly fast at the worlds in my 4 year old boat (maybe).
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgvmFmT11wAqu4HllBF72Plj5t7e1jH35U-p39aoLR_BJQml5bSSp8YWWrtL-0LHOLYS7xoFbxnOOk5wDHNI_xMClGSFA78cGwGPIkRrbsAWYnXAmmTPgV7lHjvu55B4gDxZCcTXOXmGs94/s1600/20120808_202536.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"> <img border="0" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgvmFmT11wAqu4HllBF72Plj5t7e1jH35U-p39aoLR_BJQml5bSSp8YWWrtL-0LHOLYS7xoFbxnOOk5wDHNI_xMClGSFA78cGwGPIkRrbsAWYnXAmmTPgV7lHjvu55B4gDxZCcTXOXmGs94/s320/20120808_202536.jpg" width="320" /></a></div>
The Bat Cave is turning into a disaster. It is about 16 degrees down there and a humid 35 outside so the ventilation means I am pumping water down there and the high humidity means everything is going moldy and there are puddles of condensation on the floor. This is really disappointing because a winters work is potentially wasted and the space unusable. However I think I will have to buy a dehumidifier and stop the ventilation in summer at least. It is really disappointing that the answer to making the space work is to throw energy at the problem, but that is how we humans solve a lot of problems...
<br />
<br />
On a side note I have decided to start a new blog for all the bike stuff. This is because I did not think it fair to hijack the Moth audience for my political rants. However if you are interested (as a surprisingly large number of Moth sailors seem to be) here is the blog address: <a href="http://crowize-vienna.blogspot.co.at/">crowize-vienna.blogspot.co.at</a>. I will blog here about the bat-mobile project which you can see Alfred is progressing extremely slowly. <a href="http://sailracing.blogspot.co.at/">Manfred</a> will deliver materials to Garda so I will hopefully be able to get Alfred to concentrate on this project this winter (once he has fixed the humidity problem...).
<br />
<br />
Touch Rugby continues as we train for the Euros which are shortly after the Moth worlds. Despite captaining the <a href="http://www.youtube.com/watch?v=7GL6LH6ufhM">A-Team</a> to victory in the Austrian league this year I am learning that I am getting too old for touch. The brain now knows what should be done but the body does not do is fast enough. Here is a great video of our team (with me (Nr. 8) wondering what the fuck is going on) at the Worlds against The Cook Islands last summer.
<br />
<br />
<iframe width="420" height="315" src="http://www.youtube.com/embed/9Zc7cVvZLEw" frameborder="0" allowfullscreen></iframe>
<br />
<br />
I look forward to seeing a lot of you in Garda. I will arrive on Saturday midday and hope to get the new rig working sail measured and a few beers drunk before Mondays racing start. I have only really raced at the German nationals since the Euros 2 years ago so my training has been streamlined. Therefore it will be a challenge to retain my "always come in the middle of the fleet" title.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-63738181945909847162012-07-05T17:52:00.000+01:002012-07-05T17:52:15.308+01:00German Open Nationals WalchenseeNiki and I went to the beautiful Walchensee for the German Open Nationals. Team Austria arrived with a new set of Aardvark foils for Niki and without the bag of important bits I had taken off Lord falasheart so that I do not losse them... So day one was a morning full of creative boat work to get us both on the water for the start.<br />
<br />
Lord Flashhert had never been better. The quick creative fixes were better than the stuff I have been using for the last 4 years.<i> </i>I had 3 days of fantastic racing and it really was a great event. A big thanks to the German Moth fleet and Walchensee sailing club.<br />
<br />
In the end I finished in the middle of the fleet, which is where I always end up. Lord Flashheart showed her age a bit and was the tortoise amongst the hares.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.youtube.com/embed/NNl7E1WrsB4?feature=player_embedded' frameborder='0'></iframe></div>
<br />
<br />
After the last race on the last day we all raced to the shore to escape the Mountain storm. I was 200 meters from the beach when several tons of air avalanched down a mountain onto the lake and sent me speeding faster than I have even been in a Moth. I was feeling a bit confident so I rode it as would Lord Flashheart. Then the next gust came on top of that and I was too scared to jump off so I rode it too. This did not last long and the wing I was sitting on broke in 4 places under the load. I rose to the surface of the lake after the crash and my first thought was "Thank Fuck I have stopped because i was not sure how else I could.". However now Lord Flashheart is in need of new carbon wing and I am not sure if I can get the tubes on time for the Worlds. <br /><br />Back to the (moldy) Batcave for some super hero boat fixing.<br />
<br />
<br />
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com3tag:blogger.com,1999:blog-2860987473436010329.post-70115543860880367562012-06-20T11:25:00.000+01:002012-06-20T11:25:51.491+01:00Where is the traffic light?Here is a nice example of the kind of crap you have to deal with every day on a bike in Vienna.
<br/>
<br/>
Where is the traffic light for bikes?
<br/>
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgC1Zksb0MnKgQAHV8fvxeM74yOPQMWba31ZA7cMplc6T6KHiGu5H-Uki10KR8-aEMGUAkiTfSko-WlSrYodxwJuKywYxVKGUEVOBksnWZlYYNUDJwNbLOrnpE0_UbZBDRaSg6MeXdl8obF/s1600/Lights1.jpg" imageanchor="1" style="margin-left:1em; margin-right:1em"><img border="0" height="192" width="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgC1Zksb0MnKgQAHV8fvxeM74yOPQMWba31ZA7cMplc6T6KHiGu5H-Uki10KR8-aEMGUAkiTfSko-WlSrYodxwJuKywYxVKGUEVOBksnWZlYYNUDJwNbLOrnpE0_UbZBDRaSg6MeXdl8obF/s320/Lights1.jpg" /></a>
<br/>
<br/>
From the other side of the road we can see it here pointing in totally the wrong direction.
<br/>
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiVzOqhzsu7OX_7Z9vnaLqG3m7e5X3sORfRykl2Q5SZJT3MCA94mFfoEz4YvCqTS2QfJyqNxR0wwC2uEO88GxjQnOPRpCrqchbzSVFe5SzJF_voAz26GdHDfaAYhd9e5vMXqLDBArnEc8e_/s1600/Lights2.jpg" imageanchor="1" style="margin-left:1em; margin-right:1em"><img border="0" height="192" width="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiVzOqhzsu7OX_7Z9vnaLqG3m7e5X3sORfRykl2Q5SZJT3MCA94mFfoEz4YvCqTS2QfJyqNxR0wwC2uEO88GxjQnOPRpCrqchbzSVFe5SzJF_voAz26GdHDfaAYhd9e5vMXqLDBArnEc8e_/s320/Lights2.jpg" /></a>
<br/>
I tryed to turn it and it was solid. So this is not vandals. There was no damage to it so I do not think a truck hit it and spun it round. There is no reason for a light pointing where this one does. It is clearly an installation mistake.
<br/>
<br/>
I think if there is no traffic lights a you are on a continuous RadWeg then you have right of way (however the rules are so unusably complex that you can never know). So if you can not see the light can you ride on out here at any phase?
<br/>
<br/>
The lesson here is do not take the rules of the road, road marking or signs seriously because they are a load of crap.
<br/>
<br/>
Location is here:
<br/><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhWcx-6SmRRvI4qhFymHGv4n4SMjuzO-TonD-46gq6U4-xVyniCEJU4PA8dh9eY0DY8eowRiwkjIAFRJIt-SsvUzzoK-GMc8rbqRrNQwu8Y4pxkCdKexjRL9Yn5v7oojifTRNsVoZkLoi8L/s1600/Light3.jpg" imageanchor="1" style="margin-left:1em; margin-right:1em"><img border="0" height="225" width="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhWcx-6SmRRvI4qhFymHGv4n4SMjuzO-TonD-46gq6U4-xVyniCEJU4PA8dh9eY0DY8eowRiwkjIAFRJIt-SsvUzzoK-GMc8rbqRrNQwu8Y4pxkCdKexjRL9Yn5v7oojifTRNsVoZkLoi8L/s320/Light3.jpg" /></a>Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-24662647163772906442012-06-08T09:36:00.000+01:002012-06-08T09:36:24.987+01:00Feel like a super heroI had a fantastic sail yesterday with Lord Flashhert and new AUT Moth Sailor Philip. I had my first go ever in a Prowler and a fine machine she is. It was force 3 flat water and sunshine. Really perfect conditions for a buzz around the lake. The windsurfers are not quite up to speed and all other sailing boats are stationary by comparison so you can not help but feel like a super hero as you fly around at high speed.
<br />
<br />
Meanwhile back in the Bat Cave the Bat Mobile starts to take shape:
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhOPcS2PXpKDz5e-0CmZcSy0SX-u3j_RJOGjfRMdL4G2gVPKMTnQCuefVRhgOlcFOS0JdsJ-mIeoGbIpVv6fry1HCU03Yg_y-qmADyREh80bsBhRM1EmuOpgytSlBpS_oy8DKtys-WxbrWk/s1600/IMAG0333.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhOPcS2PXpKDz5e-0CmZcSy0SX-u3j_RJOGjfRMdL4G2gVPKMTnQCuefVRhgOlcFOS0JdsJ-mIeoGbIpVv6fry1HCU03Yg_y-qmADyREh80bsBhRM1EmuOpgytSlBpS_oy8DKtys-WxbrWk/s320/IMAG0333.jpg" width="191" /></a></div>
<br />Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-41352284393542556192012-05-17T17:22:00.000+01:002012-05-17T17:30:58.666+01:00The Bat CaveIt has taken absolutely ages, but Stage 1 of the Bat Cave is done. It has taken me all winter to renovate this room in the cellar but it is now fully operational and I was repairing Assassin bits for the AUT fleet today. Unfortunately there are still 2 more rooms to do and the wettest wall in the renovated room is already going moldy and falling to bits... So despite the excitement of having a new play room I can not help questioning the sanity of the project.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjmygZNtO0ok1lJBjv885Bwploh4i7Z3BEoTDFDQaNUZ05ATRaciyLgdK5MC8kKEi_m_F_xcEfkyyCDcwL5WwnSnkF0vs42wFSv_-Q07gnZL_bx-CUhS71c5sYp-eWq28ErNRLwF7w9VSIS/s1600/DSC_0310.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="212" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjmygZNtO0ok1lJBjv885Bwploh4i7Z3BEoTDFDQaNUZ05ATRaciyLgdK5MC8kKEi_m_F_xcEfkyyCDcwL5WwnSnkF0vs42wFSv_-Q07gnZL_bx-CUhS71c5sYp-eWq28ErNRLwF7w9VSIS/s320/DSC_0310.JPG" width="320" /></a></div>
<br />
However the joy of a screw rack and being able to find my tools soon make the hours of re-mortoring seam worth while, or at least that is what I keep telling myself.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjLmJ-12SjRzf3ywmciJOK61VmZy134lHXgd-Mo8en6kJSCfWFPRS5FGoe_nkBEpW3jAl8yJ3QtZrrLvXIzoz9ei9iYuwUVyVvGjy3_NIW7lUUvVPjc56wRRRG1wcfhr3BRP6rsUWXO12CS/s1600/DSC_0311.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="212" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjLmJ-12SjRzf3ywmciJOK61VmZy134lHXgd-Mo8en6kJSCfWFPRS5FGoe_nkBEpW3jAl8yJ3QtZrrLvXIzoz9ei9iYuwUVyVvGjy3_NIW7lUUvVPjc56wRRRG1wcfhr3BRP6rsUWXO12CS/s320/DSC_0311.JPG" width="320" /></a></div>
<br />
So now the focus can go from play room to building toys in it. The Bat Mobile can now start to take shape. I am gluing bits of foam together in the hope that at some point a fair, fast, good looking shape, that me and the trike fit in, will be the result... this is also emerging to be of questionable sanity.<br />
<br />
Summer is here and it is time to play outside. A sail last weekend in a gusty strong wind demonstrated that I have to get some practice in the Moth if I am going to be able to get to the start line at the Worlds let alone stay in the thing. However the blind terror of earlier days has now been replaced with a feeling of annoyance as I get ejected and Lord Flasheart heads for the slit, so I think that is progress.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com1tag:blogger.com,1999:blog-2860987473436010329.post-72010740426295362302012-04-30T11:36:00.000+01:002012-07-19T10:46:42.717+01:00Sharks TeethI have moved this post to my CROWize Blog: <a href="http://crowize-vienna.blogspot.co.at/2012/07/sharks-teeth.html">http://crowize-vienna.blogspot.co.at/2012/07/sharks-teeth.html</a>Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-50463532161032715782012-03-18T23:16:00.003+01:002012-03-18T23:43:24.076+01:00light at the end of the caveRenovating a cellar is a lot of work but I have got far enough to start gluing together foam to make a male mould for the Batmobile.<br /><br /><p><a href='https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiocr0ABKYDURJT3Qf5Yazm3rjDAcfEOLOHi-9WL08Q-UG_VwPcl9CLPigmQgwk0AMXHx8lTitwMipgOvDuX2dMQv6QBlFDX5rJX5SSsmL_2Lg_2l-UNnZD-SFc4Y9CGVOxc4iLS5-iIBhk/s0/IMAG0282.jpg'><img src='https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiocr0ABKYDURJT3Qf5Yazm3rjDAcfEOLOHi-9WL08Q-UG_VwPcl9CLPigmQgwk0AMXHx8lTitwMipgOvDuX2dMQv6QBlFDX5rJX5SSsmL_2Lg_2l-UNnZD-SFc4Y9CGVOxc4iLS5-iIBhk/s400/IMAG0282.jpg' /></a></p><br /><br />I can now also get Lord Flashheart ready to fly. I have fixed the boat cover with our new (surprisingly complicated for a basic robust model...) sewing machine and have just one laminating repair job to do and she will ready for chocks away. It is great to see the <a href="http://www.mothapalooza.com/">Mothapalooza</a> prize which will hopefully help get some diversity back into the fleet. Send me your worlds entry for my list <a href="http://www.moth-sailing.org/worlds/2012_italy.xml">here</a>.<br /><br />Cycle campaigning is in fashion with the <a href="http://www.thetimes.co.uk/tto/public/cyclesafety/">Times Campaign</a> reaching <a href="http://www.thetimes.co.uk/tto/public/cyclesafety/article3354846.ece">Italy</a> and now <a href="http://www.wienerzeitung.at/radmanifest/">Austria</a>!<br /><br />This is probably my most positive optimistic post ever. So I will keep it short and promise that normal service will be resumed soon.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-45050391515607318202012-03-01T18:01:00.003+01:002012-03-01T18:08:43.696+01:00Fun Worlds entry listSpring is just around the corner in Europe so it is time to start thinking about summer. If you are coming to the worlds let me know, so I can add you to my list: <br /><br /><a href="http://www.moth-sailing.org/worlds/2012_italy.xml">www.moth-sailing.org/worlds/2012_italy.xml</a><br /><br />To make my life easy please resister with the IMCA site if you have not done so. You can also add your boat here: <a href="http://www.moth-sailing.org/imca/faces/AddNewBoat.jsp">http://www.moth-sailing.org/imca/faces/AddNewBoat.jsp</a>. Then send me a picture and a quick mail to doug at culnane do net and I will do the rest.<br /><br />This is not an official entry list but it is a list of people that are planning to come and their gear. This data feeds a database of boats which (like the Boats for sale feature) attempts to keep track of what boat are out there...Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com0tag:blogger.com,1999:blog-2860987473436010329.post-6239194760687330352012-02-01T18:00:00.000+01:002012-02-01T18:00:10.435+01:00Share the Road and Safety in Numbers.Some Cycling campaigners are keen to promote the idea of sharing the road and that safety in numbers leads to better conditions for cyclists. This is a nice idea but unfortunately it is total bollocks.<br /><br />Is the very basic and <a href="http://dfwptp.blogspot.com/2011/02/myths-about-safety-in-numbers.html">questionable relationship</a> between number of cyclists and accident rates really solid science on which to base traffic policy?<br /><br />Fred Wegman (Director-manager SWOV: Institute for Road Safety Research in the Netherlands.) <a href="http://www.swov.nl/rapport/Ss_RA/RA47.pdf">on page 3 says here</a> that:<br /><br /><blockquote>"I do not expect that just a greater number of cyclists will on its own result in a risk reduction for the cyclist. On the other hand, I do expect that more cycling facilities will lead to lower risks. Policy that only focuses on an increase in cycling and at the same time ignores the construction of more cycling facilities, will not have a positive effect on road safety."</blockquote><br /><br />and I believe he maybe knows what he is talking about because the Netherlands has the <a href="http://hembrow.blogspot.com/2009/05/worlds-safest-roads.html">safest roads in the World</a> despite also having a largest proportion of vulnerable cyclists road users.<br /><br />I believe that roads like this:<br /><br /><iframe src="http://www.youtube.com/embed/tBLPb0LzQnA" allowfullscreen="" frameborder="0" height="203" width="399"></iframe><br /><br />are the reason there are not many cyclists in London and why the roads are unsafe for vulnerable road users. I also believe that roads like this:<br /><br /><iframe src="http://www.youtube.com/embed/-XoATxJ-Qcg" allowfullscreen="" frameborder="0" height="233" width="400"></iframe><br /><br />are the reason that there a lots of cyclists in the Amsterdam and why they are safer. Yes there will always be conflict and there will be accidents but the results of mistakes have a much lower consequences in terms of injuries if you share the road with similar types of vehicle. The Dutch road design aims to remove or reduce the conflict between dissimilar vehicles.<br /><br />How they built this infrastructure is detailed here:<br /><br /><iframe src="http://www.youtube.com/embed/rn2s6ax_7TM" allowfullscreen="" frameborder="0" height="203" width="399"></iframe><br /><br />Good infrastructure and high cycle modal share benefits all road users, even <a href="http://hembrow.blogspot.com/2010/04/effect-of-cycle-usage-on-traffic-jams.html">car drivers</a>.<br /><br />Copenhagen gets it:<br /><iframe src="http://www.youtube.com/embed/ZtX8qiC_rXE" allowfullscreen="" frameborder="0" height="203" width="399"></iframe><br /><br /><br />Vancouver are getting it:<br /><iframe src="http://www.youtube.com/embed/Nkg9szoJ2Tc" allowfullscreen="" frameborder="0" height="203" width="399"></iframe><br /><br />Some of Vienna <a href="http://www.isocarp.net/Data/case_studies/1500.pdf">sort of gets it</a> but I feel the focus is more on law and promotion more than crap road design. I do not think I am the only one that thinks this as <a href="http://www.viennareview.net/story/02871-cycling-vienna-mixed-reviews">this article form 2009 seams to agree</a>.<br /><br />Why am I banning on about this. Well I am feed up with the bad road design that leads to unnecessary dangerous conflict. I am inspired that <a href="http://voleospeed.blogspot.com/2012/01/policy-day.html">"Cycle campaigning in the UK has now got serious"</a> and I hope this will also happen in Vienna.Doug Culnanehttp://www.blogger.com/profile/03539164499743848586noreply@blogger.com4